Nods with unit addresses must have also 'reg' property:
sc7280-herobrine-crd.dtb: eud@88e0000: ports:port@0: 'reg' is a required property
Fixes: 0b059979090d ("arm64: dts: qcom: sc7280: Add EUD dt node and dwc3 connector")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sc7280.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index bdcb74925313..71179182c3b8 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -3593,12 +3593,17 @@ eud: eud@88e0000 {
<0 0x088e2000 0 0x1000>;
interrupts-extended = <&pdc 11 IRQ_TYPE_LEVEL_HIGH>;
ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
port@0 {
+ reg = <0>;
eud_ep: endpoint {
remote-endpoint = <&usb2_role_switch>;
};
};
port@1 {
+ reg = <1>;
eud_con: endpoint {
remote-endpoint = <&con_eud>;
};
@@ -3609,7 +3614,11 @@ eud_con: endpoint {
eud_typec: connector {
compatible = "usb-c-connector";
ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
port@0 {
+ reg = <0>;
con_eud: endpoint {
remote-endpoint = <&eud_con>;
};
--
2.34.1
