For 64KiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x10000. Hence, fix the bogus PCI address
(0x20200000) specified in the ranges property for I/O region.
While at it, let's use the missing 0x prefix for the addresses.
Fixes: 095bbdd9a5c3 ("arm64: dts: qcom: ipq6018: Add pcie support")
Reported-by: Arnd Bergmann <arnd@xxxxxxxx>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@xxxxxxxxxxxxxxxx/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index bbd94025ff5d..9ff4e9d45065 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -738,8 +738,8 @@ pcie0: pci@20000000 {
phys = <&pcie_phy0>;
phy-names = "pciephy";
- ranges = <0x81000000 0 0x20200000 0 0x20200000 0 0x10000>,
- <0x82000000 0 0x20220000 0 0x20220000 0 0xfde0000>;
+ ranges = <0x81000000 0x0 0x00000000 0x0 0x20200000 0x0 0x10000>,
+ <0x82000000 0x0 0x20220000 0x0 0x20220000 0x0 0xfde0000>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
--
2.25.1
