For 1MiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x100000. Hence, fix the bogus PCI addresses
(0x60200000, 0x40200000, 0x64200000) specified in the ranges property for
I/O region.
While at it, let's use the missing 0x prefix for the addresses.
Fixes: e53bdfc00977 ("arm64: dts: qcom: sm8250: Add PCIe support")
Reported-by: Arnd Bergmann <arnd@xxxxxxxx>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@xxxxxxxxxxxxxxxx/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 2f0e460acccd..e592ddcc0f07 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -1834,8 +1834,8 @@ pcie0: pci@1c00000 {
#address-cells = <3>;
#size-cells = <2>;
- ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>,
- <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>;
+ ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+ <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
@@ -1943,7 +1943,7 @@ pcie1: pci@1c08000 {
#address-cells = <3>;
#size-cells = <2>;
- ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>,
+ ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
<0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
@@ -2051,7 +2051,7 @@ pcie2: pci@1c10000 {
#address-cells = <3>;
#size-cells = <2>;
- ranges = <0x01000000 0x0 0x64200000 0x0 0x64200000 0x0 0x100000>,
+ ranges = <0x01000000 0x0 0x00000000 0x0 0x64200000 0x0 0x100000>,
<0x02000000 0x0 0x64300000 0x0 0x64300000 0x0 0x3d00000>;
interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
--
2.25.1
