The current ast2600 I3C clock definitions are top-level (rather than
based on their actual hw sources: either HCLK or APLL), and include a
couple of definitions for (non-existent) i3c6 and i3c7.
Re-parent the individual I3C controller clocks to the main i3c clock,
explicitly sourced from the APLL rather than whatever G6_CLK_SELECTION5
was last set to.
While we're at it, remove the definitions for the i3c6 and i3c7 clock
lines; this hardware isn't present.
This is a partial cherry-pick and rework of ed44b8cdfdb and 1a35eb926d7
from Aspeed's own tree, originally by Dylan Hung
<dylan_hung@xxxxxxxxxxxxxx>.
Signed-off-by: Jeremy Kerr <jk@xxxxxxxxxxxxxxxxxxxx>
---
v4:
- expand NUM_CLKS for the new I3C clock
v3:
- split dt-bindings and clk changes
v2:
- reword commit message
---
drivers/clk/clk-ast2600.c | 40 ++++++++++++++++++++++++++++++---------
1 file changed, 31 insertions(+), 9 deletions(-)
diff --git a/drivers/clk/clk-ast2600.c b/drivers/clk/clk-ast2600.c
index 1f08ff3c60fa..d465d097e6f2 100644
--- a/drivers/clk/clk-ast2600.c
+++ b/drivers/clk/clk-ast2600.c
@@ -4,6 +4,7 @@
#define pr_fmt(fmt) "clk-ast2600: " fmt
+#include <linux/bitfield.h>
#include <linux/mfd/syscon.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
@@ -15,7 +16,7 @@
#include "clk-aspeed.h"
-#define ASPEED_G6_NUM_CLKS 71
+#define ASPEED_G6_NUM_CLKS 72
#define ASPEED_G6_SILICON_REV 0x014
#define CHIP_REVISION_ID GENMASK(23, 16)
@@ -32,6 +33,18 @@
#define ASPEED_G6_CLK_SELECTION1 0x300
#define ASPEED_G6_CLK_SELECTION2 0x304
#define ASPEED_G6_CLK_SELECTION4 0x310
+#define ASPEED_G6_CLK_SELECTION5 0x314
+#define I3C_CLK_SELECTION BIT(31)
+#define I3C_CLK_SELECT_HCLK 0
+#define I3C_CLK_SELECT_APLL_DIV 1
+#define APLL_DIV_SELECTION GENMASK(30, 28)
+#define APLL_DIV_2 0b001
+#define APLL_DIV_3 0b010
+#define APLL_DIV_4 0b011
+#define APLL_DIV_5 0b100
+#define APLL_DIV_6 0b101
+#define APLL_DIV_7 0b110
+#define APLL_DIV_8 0b111
#define ASPEED_HPLL_PARAM 0x200
#define ASPEED_APLL_PARAM 0x210
@@ -97,14 +110,13 @@ static const struct aspeed_gate_data aspeed_g6_gates[] = {
[ASPEED_CLK_GATE_LHCCLK] = { 37, -1, "lhclk-gate", "lhclk", 0 }, /* LPC master/LPC+ */
/* Reserved 38 RSA: no longer used */
/* Reserved 39 */
- [ASPEED_CLK_GATE_I3C0CLK] = { 40, 40, "i3c0clk-gate", NULL, 0 }, /* I3C0 */
- [ASPEED_CLK_GATE_I3C1CLK] = { 41, 41, "i3c1clk-gate", NULL, 0 }, /* I3C1 */
- [ASPEED_CLK_GATE_I3C2CLK] = { 42, 42, "i3c2clk-gate", NULL, 0 }, /* I3C2 */
- [ASPEED_CLK_GATE_I3C3CLK] = { 43, 43, "i3c3clk-gate", NULL, 0 }, /* I3C3 */
- [ASPEED_CLK_GATE_I3C4CLK] = { 44, 44, "i3c4clk-gate", NULL, 0 }, /* I3C4 */
- [ASPEED_CLK_GATE_I3C5CLK] = { 45, 45, "i3c5clk-gate", NULL, 0 }, /* I3C5 */
- [ASPEED_CLK_GATE_I3C6CLK] = { 46, 46, "i3c6clk-gate", NULL, 0 }, /* I3C6 */
- [ASPEED_CLK_GATE_I3C7CLK] = { 47, 47, "i3c7clk-gate", NULL, 0 }, /* I3C7 */
+ [ASPEED_CLK_GATE_I3C0CLK] = { 40, 40, "i3c0clk-gate", "i3cclk", 0 }, /* I3C0 */
+ [ASPEED_CLK_GATE_I3C1CLK] = { 41, 41, "i3c1clk-gate", "i3cclk", 0 }, /* I3C1 */
+ [ASPEED_CLK_GATE_I3C2CLK] = { 42, 42, "i3c2clk-gate", "i3cclk", 0 }, /* I3C2 */
+ [ASPEED_CLK_GATE_I3C3CLK] = { 43, 43, "i3c3clk-gate", "i3cclk", 0 }, /* I3C3 */
+ [ASPEED_CLK_GATE_I3C4CLK] = { 44, 44, "i3c4clk-gate", "i3cclk", 0 }, /* I3C4 */
+ [ASPEED_CLK_GATE_I3C5CLK] = { 45, 45, "i3c5clk-gate", "i3cclk", 0 }, /* I3C5 */
+ /* Reserved: 46 & 47 */
[ASPEED_CLK_GATE_UART1CLK] = { 48, -1, "uart1clk-gate", "uart", 0 }, /* UART1 */
[ASPEED_CLK_GATE_UART2CLK] = { 49, -1, "uart2clk-gate", "uart", 0 }, /* UART2 */
[ASPEED_CLK_GATE_UART3CLK] = { 50, -1, "uart3clk-gate", "uart", 0 }, /* UART3 */
@@ -775,6 +787,16 @@ static void __init aspeed_g6_cc(struct regmap *map)
/* USB 2.0 port1 phy 40MHz clock */
hw = clk_hw_register_fixed_rate(NULL, "usb-phy-40m", NULL, 0, 40000000);
aspeed_g6_clk_data->hws[ASPEED_CLK_USBPHY_40M] = hw;
+
+ /* i3c clock: source from apll, divide by 8 */
+ regmap_read(map, ASPEED_G6_CLK_SELECTION5, &val);
+ val &= ~(I3C_CLK_SELECTION | APLL_DIV_SELECTION);
+ val |= FIELD_PREP(I3C_CLK_SELECTION, I3C_CLK_SELECT_APLL_DIV);
+ val |= FIELD_PREP(APLL_DIV_SELECTION, APLL_DIV_8);
+ regmap_write(map, ASPEED_G6_CLK_SELECTION5, val);
+
+ hw = clk_hw_register_fixed_factor(NULL, "i3cclk", "apll", 0, 1, 8);
+ aspeed_g6_clk_data->hws[ASPEED_CLK_I3C] = hw;
};
static void __init aspeed_g6_cc_init(struct device_node *np)
--
2.39.1
