On Thu, Feb 23, 2023 at 04:50:20PM +0800, Hal Feng wrote:
> On Tue, 21 Feb 2023 16:03:08 +0100, Emil Renner Berthing wrote:
> > On Tue, 21 Feb 2023 at 03:47, Hal Feng <hal.feng@xxxxxxxxxxxxxxxx> wrote:
> >> From: Emil Renner Berthing <kernel@xxxxxxxx>
> >>
> >> Add a minimal device tree for StarFive JH7110 VisionFive 2 board
> >> which has version A and version B. Support booting and basic
> >> clock/reset/pinctrl/uart drivers.
> >>
> >> Acked-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
> >> Signed-off-by: Emil Renner Berthing <kernel@xxxxxxxx>
> >> Co-developed-by: Jianlong Huang <jianlong.huang@xxxxxxxxxxxxxxxx>
> >> Signed-off-by: Jianlong Huang <jianlong.huang@xxxxxxxxxxxxxxxx>
> >> Co-developed-by: Hal Feng <hal.feng@xxxxxxxxxxxxxxxx>
> >> Signed-off-by: Hal Feng <hal.feng@xxxxxxxxxxxxxxxx>
> >> ---
> >> arch/riscv/boot/dts/starfive/Makefile | 6 +-
> >> .../jh7110-starfive-visionfive-2-v1.2a.dts | 13 ++
> >> .../jh7110-starfive-visionfive-2-v1.3b.dts | 13 ++
> >> .../jh7110-starfive-visionfive-2.dtsi | 215 ++++++++++++++++++
> >> 4 files changed, 246 insertions(+), 1 deletion(-)
> >> create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts
> >> create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts
> >> create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> >>
> >> diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile
> >> index 039c143cba33..cd73519b907b 100644
> >> --- a/arch/riscv/boot/dts/starfive/Makefile
> >> +++ b/arch/riscv/boot/dts/starfive/Makefile
> >> @@ -1,2 +1,6 @@
> >> # SPDX-License-Identifier: GPL-2.0
> >> -dtb-$(CONFIG_SOC_STARFIVE) += jh7100-beaglev-starlight.dtb jh7100-starfive-visionfive-v1.dtb
> >> +dtb-$(CONFIG_SOC_STARFIVE) += jh7100-beaglev-starlight.dtb
> >> +dtb-$(CONFIG_SOC_STARFIVE) += jh7100-starfive-visionfive-v1.dtb
> >> +
> >> +dtb-$(CONFIG_SOC_STARFIVE) += jh7110-starfive-visionfive-2-v1.2a.dtb
> >> +dtb-$(CONFIG_SOC_STARFIVE) += jh7110-starfive-visionfive-2-v1.3b.dtb
If you could rebase on top of v6.3-rc1 for the next version & use ARCH_
not SOC_ here that'd be great.
> >> +/ {
> >> + aliases {
> >> + serial0 = &uart0;
> >> + i2c0 = &i2c0;
> >> + i2c2 = &i2c2;
> >> + i2c5 = &i2c5;
> >> + i2c6 = &i2c6;
> >
> > Let's keep these sorted alphabetically.
>
> OK, will fix it.
>
> > It would be great to have some sort of order to this file so it's
> > obvious where to add new nodes. I suggest we do
> > - root node
> > - external clocks
> > - other node references in alphabetical order
> >
> > You're almost there with this patch except the uart0 node is out of place.
>
> Will fix accordingly. Thanks for your suggestions.
With Emil's suggestions implemented:
Reviewed-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
Thanks,
Conor.
Attachment:
signature.asc
Description: PGP signature
