Re: [PATCH v4 19/19] riscv: dts: starfive: Add StarFive JH7110 VisionFive 2 board device tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 21 Feb 2023 16:03:08 +0100, Emil Renner Berthing wrote:
> On Tue, 21 Feb 2023 at 03:47, Hal Feng <hal.feng@xxxxxxxxxxxxxxxx> wrote:
>> From: Emil Renner Berthing <kernel@xxxxxxxx>
>>
>> Add a minimal device tree for StarFive JH7110 VisionFive 2 board
>> which has version A and version B. Support booting and basic
>> clock/reset/pinctrl/uart drivers.
>>
>> Acked-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
>> Signed-off-by: Emil Renner Berthing <kernel@xxxxxxxx>
>> Co-developed-by: Jianlong Huang <jianlong.huang@xxxxxxxxxxxxxxxx>
>> Signed-off-by: Jianlong Huang <jianlong.huang@xxxxxxxxxxxxxxxx>
>> Co-developed-by: Hal Feng <hal.feng@xxxxxxxxxxxxxxxx>
>> Signed-off-by: Hal Feng <hal.feng@xxxxxxxxxxxxxxxx>
>> ---
>>  arch/riscv/boot/dts/starfive/Makefile         |   6 +-
>>  .../jh7110-starfive-visionfive-2-v1.2a.dts    |  13 ++
>>  .../jh7110-starfive-visionfive-2-v1.3b.dts    |  13 ++
>>  .../jh7110-starfive-visionfive-2.dtsi         | 215 ++++++++++++++++++
>>  4 files changed, 246 insertions(+), 1 deletion(-)
>>  create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts
>>  create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts
>>  create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
>>
>> diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile
>> index 039c143cba33..cd73519b907b 100644
>> --- a/arch/riscv/boot/dts/starfive/Makefile
>> +++ b/arch/riscv/boot/dts/starfive/Makefile
>> @@ -1,2 +1,6 @@
>>  # SPDX-License-Identifier: GPL-2.0
>> -dtb-$(CONFIG_SOC_STARFIVE) += jh7100-beaglev-starlight.dtb jh7100-starfive-visionfive-v1.dtb
>> +dtb-$(CONFIG_SOC_STARFIVE) += jh7100-beaglev-starlight.dtb
>> +dtb-$(CONFIG_SOC_STARFIVE) += jh7100-starfive-visionfive-v1.dtb
>> +
>> +dtb-$(CONFIG_SOC_STARFIVE) += jh7110-starfive-visionfive-2-v1.2a.dtb
>> +dtb-$(CONFIG_SOC_STARFIVE) += jh7110-starfive-visionfive-2-v1.3b.dtb
>> diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts
>> new file mode 100644
>> index 000000000000..4af3300f3cf3
>> --- /dev/null
>> +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts
>> @@ -0,0 +1,13 @@
>> +// SPDX-License-Identifier: GPL-2.0 OR MIT
>> +/*
>> + * Copyright (C) 2022 StarFive Technology Co., Ltd.
>> + * Copyright (C) 2022 Emil Renner Berthing <kernel@xxxxxxxx>
>> + */
>> +
>> +/dts-v1/;
>> +#include "jh7110-starfive-visionfive-2.dtsi"
>> +
>> +/ {
>> +       model = "StarFive VisionFive 2 v1.2A";
>> +       compatible = "starfive,visionfive-2-v1.2a", "starfive,jh7110";
>> +};
>> diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts
>> new file mode 100644
>> index 000000000000..9230cc3d8946
>> --- /dev/null
>> +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts
>> @@ -0,0 +1,13 @@
>> +// SPDX-License-Identifier: GPL-2.0 OR MIT
>> +/*
>> + * Copyright (C) 2022 StarFive Technology Co., Ltd.
>> + * Copyright (C) 2022 Emil Renner Berthing <kernel@xxxxxxxx>
>> + */
>> +
>> +/dts-v1/;
>> +#include "jh7110-starfive-visionfive-2.dtsi"
>> +
>> +/ {
>> +       model = "StarFive VisionFive 2 v1.3B";
>> +       compatible = "starfive,visionfive-2-v1.3b", "starfive,jh7110";
>> +};
>> diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
>> new file mode 100644
>> index 000000000000..c2aa8946a0f1
>> --- /dev/null
>> +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
>> @@ -0,0 +1,215 @@
>> +// SPDX-License-Identifier: GPL-2.0 OR MIT
>> +/*
>> + * Copyright (C) 2022 StarFive Technology Co., Ltd.
>> + * Copyright (C) 2022 Emil Renner Berthing <kernel@xxxxxxxx>
>> + */
>> +
>> +/dts-v1/;
>> +#include "jh7110.dtsi"
>> +#include "jh7110-pinfunc.h"
>> +#include <dt-bindings/gpio/gpio.h>
>> +
>> +/ {
>> +       aliases {
>> +               serial0 = &uart0;
>> +               i2c0 = &i2c0;
>> +               i2c2 = &i2c2;
>> +               i2c5 = &i2c5;
>> +               i2c6 = &i2c6;
> 
> Let's keep these sorted alphabetically.

OK, will fix it.

> 
>> +       };
>> +
>> +       chosen {
>> +               stdout-path = "serial0:115200n8";
>> +       };
>> +
>> +       cpus {
>> +               timebase-frequency = <4000000>;
>> +       };
>> +
>> +       memory@40000000 {
>> +               device_type = "memory";
>> +               reg = <0x0 0x40000000 0x1 0x0>;
>> +       };
>> +
>> +       gpio-restart {
>> +               compatible = "gpio-restart";
>> +               gpios = <&sysgpio 35 GPIO_ACTIVE_HIGH>;
>> +               priority = <224>;
>> +       };
>> +};
>> +
>> +&osc {
>> +       clock-frequency = <24000000>;
>> +};
>> +
>> +&rtc_osc {
>> +       clock-frequency = <32768>;
>> +};
>> +
>> +&gmac0_rmii_refin {
>> +       clock-frequency = <50000000>;
>> +};
>> +
>> +&gmac0_rgmii_rxin {
>> +       clock-frequency = <125000000>;
>> +};
>> +
>> +&gmac1_rmii_refin {
>> +       clock-frequency = <50000000>;
>> +};
>> +
>> +&gmac1_rgmii_rxin {
>> +       clock-frequency = <125000000>;
>> +};
>> +
>> +&i2stx_bclk_ext {
>> +       clock-frequency = <12288000>;
>> +};
>> +
>> +&i2stx_lrck_ext {
>> +       clock-frequency = <192000>;
>> +};
>> +
>> +&i2srx_bclk_ext {
>> +       clock-frequency = <12288000>;
>> +};
>> +
>> +&i2srx_lrck_ext {
>> +       clock-frequency = <192000>;
>> +};
>> +
>> +&tdm_ext {
>> +       clock-frequency = <49152000>;
>> +};
>> +
>> +&mclk_ext {
>> +       clock-frequency = <12288000>;
>> +};
>> +
>> +&uart0 {
>> +       pinctrl-names = "default";
>> +       pinctrl-0 = <&uart0_pins>;
>> +       status = "okay";
>> +};
>> +
>> +&i2c0 {
>> +       clock-frequency = <100000>;
>> +       i2c-sda-hold-time-ns = <300>;
>> +       i2c-sda-falling-time-ns = <510>;
>> +       i2c-scl-falling-time-ns = <510>;
>> +       pinctrl-names = "default";
>> +       pinctrl-0 = <&i2c0_pins>;
>> +       status = "okay";
>> +};
>> +
>> +&i2c2 {
>> +       clock-frequency = <100000>;
>> +       i2c-sda-hold-time-ns = <300>;
>> +       i2c-sda-falling-time-ns = <510>;
>> +       i2c-scl-falling-time-ns = <510>;
>> +       pinctrl-names = "default";
>> +       pinctrl-0 = <&i2c2_pins>;
>> +       status = "okay";
>> +};
>> +
>> +&i2c5 {
>> +       clock-frequency = <100000>;
>> +       i2c-sda-hold-time-ns = <300>;
>> +       i2c-sda-falling-time-ns = <510>;
>> +       i2c-scl-falling-time-ns = <510>;
>> +       pinctrl-names = "default";
>> +       pinctrl-0 = <&i2c5_pins>;
>> +       status = "okay";
>> +};
>> +
>> +&i2c6 {
>> +       clock-frequency = <100000>;
>> +       i2c-sda-hold-time-ns = <300>;
>> +       i2c-sda-falling-time-ns = <510>;
>> +       i2c-scl-falling-time-ns = <510>;
>> +       pinctrl-names = "default";
>> +       pinctrl-0 = <&i2c6_pins>;
>> +       status = "okay";
>> +};
>> +
>> +&sysgpio {
>> +       uart0_pins: uart0-0 {
>> +               tx-pins {
>> +                       pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX,
>> +                                            GPOEN_ENABLE,
>> +                                            GPI_NONE)>;
>> +                       bias-disable;
>> +                       drive-strength = <12>;
>> +                       input-disable;
>> +                       input-schmitt-disable;
>> +                       slew-rate = <0>;
>> +               };
>> +
>> +               rx-pins {
>> +                       pinmux = <GPIOMUX(6, GPOUT_LOW,
>> +                                            GPOEN_DISABLE,
>> +                                            GPI_SYS_UART0_RX)>;
>> +                       bias-disable; /* external pull-up */
>> +                       drive-strength = <2>;
>> +                       input-enable;
>> +                       input-schmitt-enable;
>> +                       slew-rate = <0>;
>> +               };
>> +       };
>> +
>> +       i2c0_pins: i2c0-0 {
>> +               i2c-pins {
>> +                       pinmux = <GPIOMUX(57, GPOUT_LOW,
>> +                                             GPOEN_SYS_I2C0_CLK,
>> +                                             GPI_SYS_I2C0_CLK)>,
>> +                                <GPIOMUX(58, GPOUT_LOW,
>> +                                             GPOEN_SYS_I2C0_DATA,
>> +                                             GPI_SYS_I2C0_DATA)>;
>> +                       bias-disable; /* external pull-up */
>> +                       input-enable;
>> +                       input-schmitt-enable;
>> +               };
>> +       };
>> +
>> +       i2c2_pins: i2c2-0 {
>> +               i2c-pins {
>> +                       pinmux = <GPIOMUX(3, GPOUT_LOW,
>> +                                            GPOEN_SYS_I2C2_CLK,
>> +                                            GPI_SYS_I2C2_CLK)>,
>> +                                <GPIOMUX(2, GPOUT_LOW,
>> +                                            GPOEN_SYS_I2C2_DATA,
>> +                                            GPI_SYS_I2C2_DATA)>;
>> +                       bias-disable; /* external pull-up */
>> +                       input-enable;
>> +                       input-schmitt-enable;
>> +               };
>> +       };
>> +
>> +       i2c5_pins: i2c5-0 {
>> +               i2c-pins {
>> +                       pinmux = <GPIOMUX(19, GPOUT_LOW,
>> +                                             GPOEN_SYS_I2C5_CLK,
>> +                                             GPI_SYS_I2C5_CLK)>,
>> +                                <GPIOMUX(20, GPOUT_LOW,
>> +                                             GPOEN_SYS_I2C5_DATA,
>> +                                             GPI_SYS_I2C5_DATA)>;
>> +                       bias-disable; /* external pull-up */
>> +                       input-enable;
>> +                       input-schmitt-enable;
>> +               };
>> +       };
>> +
>> +       i2c6_pins: i2c6-0 {
>> +               i2c-pins {
>> +                       pinmux = <GPIOMUX(16, GPOUT_LOW,
>> +                                             GPOEN_SYS_I2C6_CLK,
>> +                                             GPI_SYS_I2C6_CLK)>,
>> +                                <GPIOMUX(17, GPOUT_LOW,
>> +                                             GPOEN_SYS_I2C6_DATA,
>> +                                             GPI_SYS_I2C6_DATA)>;
>> +                       bias-disable; /* external pull-up */
>> +                       input-enable;
>> +                       input-schmitt-enable;
>> +               };
>> +       };
>> +};
> 
> It would be great to have some sort of order to this file so it's
> obvious where to add new nodes. I suggest we do
> - root node
> - external clocks
> - other node references in alphabetical order
> 
> You're almost there with this patch except the uart0 node is out of place.

Will fix accordingly. Thanks for your suggestions.

Best regards,
Hal



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux