Re: [PATCH 1/1] arm64: dts: imx93: Add FlexSPI support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Marco,

Am Montag, 27. Februar 2023, 11:57:10 CET schrieb Marco Felsch:
> Hi Alexander,
> 
> On 23-02-27, Alexander Stein wrote:
> > Add FlexSPI node for i.MX93.
> > 
> > Signed-off-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
> > ---
> > This is mainly taken from the downstream kernel with the clock order
> > fixed and 'nxp,imx93-fspi' compatible removed.
> > I do not know if it makes sense to add an imx93 specific compatible or
> > not. imx8mn uses imx8mm only, but imx8mp has it's own. But the latter
> > uses the same device data in the driver.
> > 
> >  arch/arm64/boot/dts/freescale/imx93.dtsi | 15 +++++++++++++++
> >  1 file changed, 15 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi
> > b/arch/arm64/boot/dts/freescale/imx93.dtsi index
> > 3c3d3d570d8c..1d71ca8d1f5a 100644
> > --- a/arch/arm64/boot/dts/freescale/imx93.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
> > @@ -458,6 +458,21 @@ flexcan2: can@425b0000 {
> > 
> >  				status = "disabled";
> >  			
> >  			};
> > 
> > +			flexspi1: spi@425e0000 {
> > +				#address-cells = <1>;
> > +				#size-cells = <0>;
> > +				compatible = "nxp,imx8mm-fspi";
> > +				reg = <0x425e0000 0x10000>, 
<0x28000000 0x10000000>;
> 
> The compatible should always be the first entry, followed by reg.

Thanks for the feedback. I was wondering about this, but there is no 
consistency within this file :(

Best regards,
Alexander

> Regards,
>   Marco
> 
> > +				reg-names = "fspi_base", "fspi_mmap";
> > +				interrupts = <GIC_SPI 55 
IRQ_TYPE_LEVEL_HIGH>;
> > +				clocks = <&clk 
IMX93_CLK_FLEXSPI1_GATE>,
> > +					 <&clk 
IMX93_CLK_FLEXSPI1_GATE>;
> > +				clock-names = "fspi_en", "fspi";
> > +				assigned-clocks = <&clk 
IMX93_CLK_FLEXSPI1>;
> > +				assigned-clock-parents = <&clk 
IMX93_CLK_SYS_PLL_PFD1>;
> > +				status = "disabled";
> > +			};
> > +
> > 
> >  			lpuart7: serial@42690000 {
> >  			
> >  				compatible = "fsl,imx93-lpuart", 
"fsl,imx7ulp-lpuart";
> >  				reg = <0x42690000 0x1000>;


-- 
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/






[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux