From: Aswath Govindraju <a-govindraju@xxxxxx> Configure first lane to PCIe, the second lane to USB and the last two lanes to eDP. Also, add sub-nodes to SERDES0 DT node to represent SERDES0 is connected to PCIe. Signed-off-by: Aswath Govindraju <a-govindraju@xxxxxx> Signed-off-by: Matt Ranostay <mranostay@xxxxxx> Signed-off-by: Ravi Gunasekaran <r-gunasekaran@xxxxxx> --- I had reviewed this patch in the v5 series [0]. Since I'm taking over upstreaming this series, I removed the self Reviewed-by tag. [0] - https://lore.kernel.org/all/71ce4ecd-2a50-c69d-28be-f1a8d769970e@xxxxxx/ Changes from v10: * Removed Link tag from commit message Changes from v9: * Enabled serdes related nodes Changes from v8: * No change Changes from v7: * No change Changes from v6: * No change Changes from v5: * Removed Cc tags from commit message Changes from v4: * No change Changes from v3: * No change Changes from v2: * No change Changes from v1: * No change .../dts/ti/k3-j721s2-common-proc-board.dts | 27 +++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts index a7aa6cf08acd..907f34ff22a5 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts @@ -9,6 +9,9 @@ #include "k3-j721s2-som-p0.dtsi" #include <dt-bindings/net/ti-dp83867.h> +#include <dt-bindings/phy/phy-cadence.h> +#include <dt-bindings/phy/phy.h> +#include <dt-bindings/mux/ti-serdes.h> / { compatible = "ti,j721s2-evm", "ti,j721s2"; @@ -296,6 +299,30 @@ phy-handle = <&phy0>; }; +&serdes_ln_ctrl { + idle-states = <J721S2_SERDES0_LANE0_PCIE1_LANE0>, <J721S2_SERDES0_LANE1_USB>, + <J721S2_SERDES0_LANE2_EDP_LANE2>, <J721S2_SERDES0_LANE3_EDP_LANE3>; +}; + +&serdes_refclk { + clock-frequency = <100000000>; +}; + +&serdes_wiz0 { + status = "okay"; +}; + +&serdes0 { + status = "okay"; + serdes0_pcie_link: phy@0 { + reg = <0>; + cdns,num-lanes = <1>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_PCIE>; + resets = <&serdes_wiz0 1>; + }; +}; + &mcu_mcan0 { status = "okay"; pinctrl-names = "default"; -- 2.17.1
