On 22.02.2023 01:10, Gergo Koteles wrote:
> The alert-slider is a tri-state sound profile switch found on the OnePlus 6,
> Android maps the states to "silent", "vibrate" and "ring". Expose them as
> ABS_SND_PROFILE events.
> The previous GPIO numbers were wrong. Update them to the correct
> ones.
>
> Co-developed-by: Caleb Connolly <caleb@xxxxxxxxxxxxx>
> Signed-off-by: Caleb Connolly <caleb@xxxxxxxxxxxxx>
> Signed-off-by: Gergo Koteles <soyer@xxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Konrad
> .../boot/dts/qcom/sdm845-oneplus-common.dtsi | 39 ++++++++++++++++++-
> 1 file changed, 37 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
> index 64638ea94db7..7567f5cf6e3f 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
> @@ -20,6 +20,41 @@
> /delete-node/ &rmtfs_mem;
>
> / {
> + alert-slider {
> + compatible = "gpio-keys";
> + label = "Alert slider";
> +
> + pinctrl-0 = <&alert_slider_default>;
> + pinctrl-names = "default";
> +
> + switch-top {
> + label = "Silent";
> + linux,input-type = <EV_ABS>;
> + linux,code = <ABS_SND_PROFILE>;
> + linux,input-value = <SND_PROFILE_SILENT>;
> + gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
> + linux,can-disable;
> + };
> +
> + switch-middle {
> + label = "Vibrate";
> + linux,input-type = <EV_ABS>;
> + linux,code = <ABS_SND_PROFILE>;
> + linux,input-value = <SND_PROFILE_VIBRATE>;
> + gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
> + linux,can-disable;
> + };
> +
> + switch-bottom {
> + label = "Ring";
> + linux,input-type = <EV_ABS>;
> + linux,code = <ABS_SND_PROFILE>;
> + linux,input-value = <SND_PROFILE_RING>;
> + gpios = <&tlmm 24 GPIO_ACTIVE_LOW>;
> + linux,can-disable;
> + };
> + };
> +
> aliases {
> serial0 = &uart9;
> serial1 = &uart6;
> @@ -753,8 +788,8 @@ &usb_1_hsphy {
> &tlmm {
> gpio-reserved-ranges = <0 4>, <81 4>;
>
> - tri_state_key_default: tri-state-key-default-state {
> - pins = "gpio40", "gpio42", "gpio26";
> + alert_slider_default: alert-slider-default-state {
> + pins = "gpio126", "gpio52", "gpio24";
> function = "gpio";
> drive-strength = <2>;
> bias-disable;
