[PATCH v4 3/3] arm64: dts: qcom: sdm845-oneplus: add alert-slider

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The alert-slider is a tri-state sound profile switch found on the OnePlus 6,
Android maps the states to "silent", "vibrate" and "ring". Expose them as
ABS_SND_PROFILE events.
The previous GPIO numbers were wrong. Update them to the correct
ones.

Co-developed-by: Caleb Connolly <caleb@xxxxxxxxxxxxx>
Signed-off-by: Caleb Connolly <caleb@xxxxxxxxxxxxx>
Signed-off-by: Gergo Koteles <soyer@xxxxxx>
---
 .../boot/dts/qcom/sdm845-oneplus-common.dtsi  | 39 ++++++++++++++++++-
 1 file changed, 37 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
index 64638ea94db7..7567f5cf6e3f 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
@@ -20,6 +20,41 @@
 /delete-node/ &rmtfs_mem;
 
 / {
+	alert-slider {
+		compatible = "gpio-keys";
+		label = "Alert slider";
+
+		pinctrl-0 = <&alert_slider_default>;
+		pinctrl-names = "default";
+
+		switch-top {
+			label = "Silent";
+			linux,input-type = <EV_ABS>;
+			linux,code = <ABS_SND_PROFILE>;
+			linux,input-value = <SND_PROFILE_SILENT>;
+			gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
+			linux,can-disable;
+		};
+
+		switch-middle {
+			label = "Vibrate";
+			linux,input-type = <EV_ABS>;
+			linux,code = <ABS_SND_PROFILE>;
+			linux,input-value = <SND_PROFILE_VIBRATE>;
+			gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
+			linux,can-disable;
+		};
+
+		switch-bottom {
+			label = "Ring";
+			linux,input-type = <EV_ABS>;
+			linux,code = <ABS_SND_PROFILE>;
+			linux,input-value = <SND_PROFILE_RING>;
+			gpios = <&tlmm 24 GPIO_ACTIVE_LOW>;
+			linux,can-disable;
+		};
+	};
+
 	aliases {
 		serial0 = &uart9;
 		serial1 = &uart6;
@@ -753,8 +788,8 @@ &usb_1_hsphy {
 &tlmm {
 	gpio-reserved-ranges = <0 4>, <81 4>;
 
-	tri_state_key_default: tri-state-key-default-state {
-		pins = "gpio40", "gpio42", "gpio26";
+	alert_slider_default: alert-slider-default-state {
+		pins = "gpio126", "gpio52", "gpio24";
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
-- 
2.39.2




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux