Hi, You can find v9 from: https://lore.kernel.org/all/20230216140747.445477-1-tomi.valkeinen@xxxxxxxxxxxxxxxx/ Diff to v9 included below. Main changes in v10: - Switch pre-increments to post-increments - Add macros for FPD3_RX_ID lengths - Use regmap_bulk_read in 16 bit reg accessors Tomi Luca Ceresoli (1): i2c: add I2C Address Translator (ATR) support Tomi Valkeinen (7): media: subdev: Split V4L2_SUBDEV_ROUTING_NO_STREAM_MIX dt-bindings: media: add TI DS90UB913 FPD-Link III Serializer dt-bindings: media: add TI DS90UB953 FPD-Link III Serializer dt-bindings: media: add TI DS90UB960 FPD-Link III Deserializer media: i2c: add DS90UB960 driver media: i2c: add DS90UB913 driver media: i2c: add DS90UB953 driver .../bindings/media/i2c/ti,ds90ub913.yaml | 133 + .../bindings/media/i2c/ti,ds90ub953.yaml | 134 + .../bindings/media/i2c/ti,ds90ub960.yaml | 431 ++ Documentation/i2c/index.rst | 1 + Documentation/i2c/muxes/i2c-atr.rst | 97 + MAINTAINERS | 16 + drivers/i2c/Kconfig | 9 + drivers/i2c/Makefile | 1 + drivers/i2c/i2c-atr.c | 548 +++ drivers/media/i2c/Kconfig | 47 + drivers/media/i2c/Makefile | 3 + drivers/media/i2c/ds90ub913.c | 906 ++++ drivers/media/i2c/ds90ub953.c | 1400 ++++++ drivers/media/i2c/ds90ub960.c | 4172 +++++++++++++++++ drivers/media/v4l2-core/v4l2-subdev.c | 17 +- include/linux/i2c-atr.h | 116 + include/media/i2c/ds90ub9xx.h | 22 + include/media/v4l2-subdev.h | 16 +- 18 files changed, 8062 insertions(+), 7 deletions(-) create mode 100644 Documentation/devicetree/bindings/media/i2c/ti,ds90ub913.yaml create mode 100644 Documentation/devicetree/bindings/media/i2c/ti,ds90ub953.yaml create mode 100644 Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml create mode 100644 Documentation/i2c/muxes/i2c-atr.rst create mode 100644 drivers/i2c/i2c-atr.c create mode 100644 drivers/media/i2c/ds90ub913.c create mode 100644 drivers/media/i2c/ds90ub953.c create mode 100644 drivers/media/i2c/ds90ub960.c create mode 100644 include/linux/i2c-atr.h create mode 100644 include/media/i2c/ds90ub9xx.h Interdiff against v9: diff --git a/drivers/i2c/i2c-atr.c b/drivers/i2c/i2c-atr.c index a41e941ad972..5ab890b83670 100644 --- a/drivers/i2c/i2c-atr.c +++ b/drivers/i2c/i2c-atr.c @@ -298,8 +298,11 @@ static void i2c_atr_detach_client(struct i2c_adapter *adapter, atr->ops->detach_client(atr, chan->chan_id, client); c2a = i2c_atr_find_mapping_by_client(&chan->alias_list, client); - if (!c2a) - return; /* This shouldn't happen */ + if (!c2a) { + /* This should never happen */ + dev_warn(atr->dev, "Unable to find address mapping\n"); + return; + } dev_dbg(atr->dev, "chan%u: client 0x%02x unmapped from alias 0x%02x (%s)\n", diff --git a/drivers/media/i2c/ds90ub913.c b/drivers/media/i2c/ds90ub913.c index f7696bce7c77..203f7cceae23 100644 --- a/drivers/media/i2c/ds90ub913.c +++ b/drivers/media/i2c/ds90ub913.c @@ -108,7 +108,7 @@ static const struct ub913_format_info *ub913_find_format(u32 incode) { unsigned int i; - for (i = 0; i < ARRAY_SIZE(ub913_formats); ++i) { + for (i = 0; i < ARRAY_SIZE(ub913_formats); i++) { if (ub913_formats[i].incode == incode) return &ub913_formats[i]; } @@ -276,7 +276,7 @@ static int _ub913_set_routing(struct v4l2_subdev *sd, struct v4l2_subdev_state *state, struct v4l2_subdev_krouting *routing) { - static const struct v4l2_mbus_framefmt informat = { + static const struct v4l2_mbus_framefmt in_format = { .width = 640, .height = 480, .code = MEDIA_BUS_FMT_UYVY8_2X8, @@ -286,7 +286,7 @@ static int _ub913_set_routing(struct v4l2_subdev *sd, .quantization = V4L2_QUANTIZATION_LIM_RANGE, .xfer_func = V4L2_XFER_FUNC_SRGB, }; - static const struct v4l2_mbus_framefmt outformat = { + static const struct v4l2_mbus_framefmt out_format = { .width = 640, .height = 480, .code = MEDIA_BUS_FMT_UYVY8_1X16, @@ -319,11 +319,11 @@ static int _ub913_set_routing(struct v4l2_subdev *sd, stream_configs = &state->stream_configs; - for (i = 0; i < stream_configs->num_configs; ++i) { + for (i = 0; i < stream_configs->num_configs; i++) { if (stream_configs->configs[i].pad == UB913_PAD_SINK) - stream_configs->configs[i].fmt = informat; + stream_configs->configs[i].fmt = in_format; else - stream_configs->configs[i].fmt = outformat; + stream_configs->configs[i].fmt = out_format; } return 0; @@ -374,7 +374,7 @@ static int ub913_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad, if (route->source_pad != pad) continue; - for (i = 0; i < source_fd.num_entries; ++i) { + for (i = 0; i < source_fd.num_entries; i++) { if (source_fd.entry[i].stream == route->sink_stream) break; } diff --git a/drivers/media/i2c/ds90ub953.c b/drivers/media/i2c/ds90ub953.c index 6efe1460c976..a77908da5c38 100644 --- a/drivers/media/i2c/ds90ub953.c +++ b/drivers/media/i2c/ds90ub953.c @@ -87,6 +87,7 @@ #define UB953_REG_IND_ACC_DATA 0xb2 #define UB953_REG_FPD3_RX_ID(n) (0xf0 + (n)) +#define UB953_REG_FPD3_RX_ID_LEN 6 /* Indirect register blocks */ #define UB953_IND_TARGET_PAT_GEN 0x00 @@ -272,14 +273,14 @@ static int ub953_write_ind(struct ub953_data *priv, u8 block, u8 reg, u8 val) ret = ub953_select_ind_reg_block(priv, block); if (ret) - goto out; + goto out_unlock; ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_ADDR, reg); if (ret) { dev_err(&priv->client->dev, "Write to IND_ACC_ADDR failed when writing %u:%x02x: %d\n", block, reg, ret); - goto out; + goto out_unlock; } ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_DATA, val); @@ -289,7 +290,7 @@ static int ub953_write_ind(struct ub953_data *priv, u8 block, u8 reg, u8 val) block, reg, ret); } -out: +out_unlock: mutex_unlock(&priv->reg_lock); return ret; @@ -498,7 +499,7 @@ static int ub953_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad, if (route->source_pad != pad) continue; - for (i = 0; i < source_fd.num_entries; ++i) { + for (i = 0; i < source_fd.num_entries; i++) { if (source_fd.entry[i].stream == route->sink_stream) { source_entry = &source_fd.entry[i]; break; @@ -591,16 +592,15 @@ static int ub953_log_status(struct v4l2_subdev *sd) struct device *dev = &priv->client->dev; u8 v = 0, v1 = 0, v2 = 0; unsigned int i; - char id[7]; + char id[UB953_REG_FPD3_RX_ID_LEN]; u8 gpio_local_data; u8 gpio_input_ctrl; u8 gpio_pin_sts; - for (i = 0; i < 6; ++i) + for (i = 0; i < sizeof(id); i++) ub953_read(priv, UB953_REG_FPD3_RX_ID(i), &id[i]); - id[6] = 0; - dev_info(dev, "ID '%s'\n", id); + dev_info(dev, "ID '%.*s'\n", sizeof(id), id); ub953_read(priv, UB953_REG_GENERAL_STATUS, &v); dev_info(dev, "GENERAL_STATUS %#02x\n", v); @@ -638,7 +638,7 @@ static int ub953_log_status(struct v4l2_subdev *sd) ub953_read(priv, UB953_REG_GPIO_INPUT_CTRL, &gpio_input_ctrl); ub953_read(priv, UB953_REG_GPIO_PIN_STS, &gpio_pin_sts); - for (i = 0; i < UB953_NUM_GPIOS; ++i) { + for (i = 0; i < UB953_NUM_GPIOS; i++) { dev_info(dev, "GPIO%u: remote: %u is_input: %u is_output: %u val: %u sts: %u\n", i, diff --git a/drivers/media/i2c/ds90ub960.c b/drivers/media/i2c/ds90ub960.c index 1ae0c7cda7c7..c9dfe2ea0dfb 100644 --- a/drivers/media/i2c/ds90ub960.c +++ b/drivers/media/i2c/ds90ub960.c @@ -7,7 +7,7 @@ */ /* - * (Possible) TODOs + * (Possible) TODOs: * * - PM for serializer and remote peripherals. We need to manage: * - VPOC @@ -347,6 +347,7 @@ #define UB960_RR_CHANNEL_MODE 0xe4 /* UB9702 */ #define UB960_SR_FPD3_RX_ID(n) (0xf0 + (n)) +#define UB960_SR_FPD3_RX_ID_LEN 6 #define UB960_SR_I2C_RX_ID(n) (0xf8 + (n)) /* < UB960_FPD_RX_NPORTS */ @@ -487,10 +488,11 @@ struct ub960_txport { struct atr_alias_table_entry { u16 alias_id; /* Alias ID from DT */ - bool in_use; u8 nport; u8 slave_id; /* i2c client's local i2c address */ u8 port_reg_idx; + + bool in_use; }; struct ub960_data { @@ -595,7 +597,7 @@ static const struct ub960_format_info *ub960_find_format(u32 code) { unsigned int i; - for (i = 0; i < ARRAY_SIZE(ub960_formats); ++i) { + for (i = 0; i < ARRAY_SIZE(ub960_formats); i++) { if (ub960_formats[i].code == code) return &ub960_formats[i]; } @@ -667,26 +669,19 @@ static int ub960_update_bits(struct ub960_data *priv, u8 reg, u8 mask, u8 val) static int ub960_read16(struct ub960_data *priv, u8 reg, u16 *val) { struct device *dev = &priv->client->dev; - unsigned int v1, v2; + __be16 __v; int ret; mutex_lock(&priv->reg_lock); - ret = regmap_read(priv->regmap, reg, &v1); + ret = regmap_bulk_read(priv->regmap, reg, &__v, 2); if (ret) { dev_err(dev, "%s: cannot read register 0x%02x (%d)!\n", __func__, reg, ret); goto out_unlock; } - ret = regmap_read(priv->regmap, reg + 1, &v2); - if (ret) { - dev_err(dev, "%s: cannot read register 0x%02x (%d)!\n", - __func__, reg + 1, ret); - goto out_unlock; - } - - *val = (v1 << 8) | v2; + *val = be16_to_cpu(__v); out_unlock: mutex_unlock(&priv->reg_lock); @@ -793,8 +788,7 @@ static int ub960_rxport_read16(struct ub960_data *priv, u8 nport, u8 reg, u16 *val) { struct device *dev = &priv->client->dev; - unsigned int v1; - unsigned int v2; + __be16 __v; int ret; mutex_lock(&priv->reg_lock); @@ -803,21 +797,14 @@ static int ub960_rxport_read16(struct ub960_data *priv, u8 nport, u8 reg, if (ret) goto out_unlock; - ret = regmap_read(priv->regmap, reg, &v1); + ret = regmap_bulk_read(priv->regmap, reg, &__v, 2); if (ret) { dev_err(dev, "%s: cannot read register 0x%02x (%d)!\n", __func__, reg, ret); goto out_unlock; } - ret = regmap_read(priv->regmap, reg + 1, &v2); - if (ret) { - dev_err(dev, "%s: cannot read register 0x%02x (%d)!\n", - __func__, reg + 1, ret); - goto out_unlock; - } - - *val = (v1 << 8) | v2; + *val = be16_to_cpu(__v); out_unlock: mutex_unlock(&priv->reg_lock); @@ -1072,7 +1059,7 @@ static int ub960_atr_attach_client(struct i2c_atr *atr, u32 chan_id, * 2. Construct a bitmask of port's used alias entries */ - for (pool_idx = 0; pool_idx < priv->atr.num_aliases; ++pool_idx) { + for (pool_idx = 0; pool_idx < priv->atr.num_aliases; pool_idx++) { struct atr_alias_table_entry *e; e = &priv->atr.aliases[pool_idx]; @@ -1133,7 +1120,7 @@ static void ub960_atr_detach_client(struct i2c_atr *atr, u32 chan_id, /* Find alias mapped to this client */ - for (pool_idx = 0; pool_idx < priv->atr.num_aliases; ++pool_idx) { + for (pool_idx = 0; pool_idx < priv->atr.num_aliases; pool_idx++) { entry = &priv->atr.aliases[pool_idx]; if (entry->in_use && entry->nport == rxport->nport && @@ -1271,7 +1258,7 @@ static int ub960_rxport_enable_vpocs(struct ub960_data *priv) unsigned int nport; int ret; - for (nport = 0; nport < priv->hw_data->num_rxports; ++nport) { + for (nport = 0; nport < priv->hw_data->num_rxports; nport++) { struct ub960_rxport *rxport = priv->rxports[nport]; if (!rxport || !rxport->vpoc) @@ -1301,7 +1288,7 @@ static void ub960_rxport_disable_vpocs(struct ub960_data *priv) { unsigned int nport; - for (nport = 0; nport < priv->hw_data->num_rxports; ++nport) { + for (nport = 0; nport < priv->hw_data->num_rxports; nport++) { struct ub960_rxport *rxport = priv->rxports[nport]; if (!rxport || !rxport->vpoc) @@ -1331,7 +1318,7 @@ static void ub960_clear_rx_errors(struct ub960_data *priv) { unsigned int nport; - for (nport = 0; nport < priv->hw_data->num_rxports; ++nport) + for (nport = 0; nport < priv->hw_data->num_rxports; nport++) ub960_rxport_clear_errors(priv, nport); } @@ -1768,7 +1755,7 @@ static int ub960_rxport_add_serializers(struct ub960_data *priv) unsigned int nport; int ret; - for (nport = 0; nport < priv->hw_data->num_rxports; ++nport) { + for (nport = 0; nport < priv->hw_data->num_rxports; nport++) { struct ub960_rxport *rxport = priv->rxports[nport]; if (!rxport) @@ -1798,7 +1785,7 @@ static void ub960_rxport_remove_serializers(struct ub960_data *priv) { unsigned int nport; - for (nport = 0; nport < priv->hw_data->num_rxports; ++nport) { + for (nport = 0; nport < priv->hw_data->num_rxports; nport++) { struct ub960_rxport *rxport = priv->rxports[nport]; if (!rxport) @@ -1875,7 +1862,7 @@ static int ub960_init_tx_ports(struct ub960_data *priv) } } - for (nport = 0; nport < priv->hw_data->num_txports; ++nport) { + for (nport = 0; nport < priv->hw_data->num_txports; nport++) { struct ub960_txport *txport = priv->txports[nport]; if (!txport) @@ -2204,7 +2191,7 @@ static int ub960_init_rx_ports(struct ub960_data *priv) { unsigned int nport; - for (nport = 0; nport < priv->hw_data->num_rxports; ++nport) { + for (nport = 0; nport < priv->hw_data->num_rxports; nport++) { struct ub960_rxport *rxport = priv->rxports[nport]; if (!rxport) @@ -2432,11 +2419,11 @@ static int ub960_validate_stream_vcs(struct ub960_data *priv) unsigned int nport; unsigned int i; - for (nport = 0; nport < priv->hw_data->num_rxports; ++nport) { + for (nport = 0; nport < priv->hw_data->num_rxports; nport++) { struct ub960_rxport *rxport = priv->rxports[nport]; struct v4l2_mbus_frame_desc desc; int ret; - u8 cur_vc; + u8 vc; if (!rxport) continue; @@ -2449,15 +2436,13 @@ static int ub960_validate_stream_vcs(struct ub960_data *priv) if (desc.type != V4L2_MBUS_FRAME_DESC_TYPE_CSI2) continue; - for (i = 0; i < desc.num_entries; ++i) { - u8 vc = desc.entry[i].bus.csi2.vc; + if (desc.num_entries == 0) + continue; - if (i == 0) { - cur_vc = vc; - continue; - } + vc = desc.entry[0].bus.csi2.vc; - if (vc == cur_vc) + for (i = 1; i < desc.num_entries; i++) { + if (vc == desc.entry[i].bus.csi2.vc) continue; dev_err(&priv->client->dev, @@ -2550,7 +2535,7 @@ static int ub960_configure_ports_for_streaming(struct ub960_data *priv, fwd_ctl = 0; - for (nport = 0; nport < priv->hw_data->num_rxports; ++nport) { + for (nport = 0; nport < priv->hw_data->num_rxports; nport++) { struct ub960_rxport *rxport = priv->rxports[nport]; u8 vc = vc_map[nport]; @@ -2587,7 +2572,7 @@ static int ub960_configure_ports_for_streaming(struct ub960_data *priv, unsigned int i; /* Map all VCs from this port to VC(nport) */ - for (i = 0; i < 8; ++i) + for (i = 0; i < 8; i++) ub960_rxport_write(priv, nport, UB960_RR_VC_ID_MAP(i), nport); @@ -2615,7 +2600,7 @@ static void ub960_update_streaming_status(struct ub960_data *priv) { unsigned int i; - for (i = 0; i < UB960_MAX_NPORTS; ++i) { + for (i = 0; i < UB960_MAX_NPORTS; i++) { if (priv->stream_enable_mask[i]) break; } @@ -2665,7 +2650,7 @@ static int ub960_enable_streams(struct v4l2_subdev *sd, sink_streams[nport] |= BIT_ULL(route->sink_stream); } - for (nport = 0; nport < priv->hw_data->num_rxports; ++nport) { + for (nport = 0; nport < priv->hw_data->num_rxports; nport++) { if (!sink_streams[nport]) continue; @@ -2703,7 +2688,7 @@ static int ub960_enable_streams(struct v4l2_subdev *sd, return 0; err: - for (nport = 0; nport < failed_port; ++nport) { + for (nport = 0; nport < failed_port; nport++) { if (!sink_streams[nport]) continue; @@ -2759,7 +2744,7 @@ static int ub960_disable_streams(struct v4l2_subdev *sd, sink_streams[nport] |= BIT_ULL(route->sink_stream); } - for (nport = 0; nport < priv->hw_data->num_rxports; ++nport) { + for (nport = 0; nport < priv->hw_data->num_rxports; nport++) { if (!sink_streams[nport]) continue; @@ -2886,7 +2871,7 @@ static int ub960_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad, goto out_unlock; } - for (i = 0; i < source_fd.num_entries; ++i) { + for (i = 0; i < source_fd.num_entries; i++) { if (source_fd.entry[i].stream == route->sink_stream) { source_entry = &source_fd.entry[i]; break; @@ -3025,17 +3010,16 @@ static int ub960_log_status(struct v4l2_subdev *sd) unsigned int i; u16 v16 = 0; u8 v = 0; - u8 id[7]; + u8 id[UB960_SR_FPD3_RX_ID_LEN]; state = v4l2_subdev_lock_and_get_active_state(sd); - for (i = 0; i < 6; ++i) + for (i = 0; i < sizeof(id); i++) ub960_read(priv, UB960_SR_FPD3_RX_ID(i), &id[i]); - id[6] = 0; - dev_info(dev, "ID '%s'\n", id); + dev_info(dev, "ID '%.*s'\n", sizeof(id), id); - for (nport = 0; nport < priv->hw_data->num_txports; ++nport) { + for (nport = 0; nport < priv->hw_data->num_txports; nport++) { struct ub960_txport *txport = priv->txports[nport]; dev_info(dev, "TX %u\n", nport); @@ -3062,7 +3046,7 @@ static int ub960_log_status(struct v4l2_subdev *sd) dev_info(dev, "\tline error counter %u\n", v16); } - for (nport = 0; nport < priv->hw_data->num_rxports; ++nport) { + for (nport = 0; nport < priv->hw_data->num_rxports; nport++) { struct ub960_rxport *rxport = priv->rxports[nport]; u8 eq_level; s8 strobe_pos; @@ -3141,7 +3125,7 @@ static int ub960_log_status(struct v4l2_subdev *sd) dev_info(dev, "\tEQ level %u\n", eq_level); /* GPIOs */ - for (i = 0; i < UB960_NUM_BC_GPIOS; ++i) { + for (i = 0; i < UB960_NUM_BC_GPIOS; i++) { u8 ctl_reg; u8 ctl_shift; @@ -3201,12 +3185,12 @@ static irqreturn_t ub960_handle_events(int irq, void *arg) dev_dbg(&priv->client->dev, "FWD_STS %#02x\n", fwd_sts); - for (i = 0; i < priv->hw_data->num_txports; ++i) { + for (i = 0; i < priv->hw_data->num_txports; i++) { if (int_sts & UB960_SR_INTERRUPT_STS_IS_CSI_TX(i)) ub960_csi_handle_events(priv, i); } - for (i = 0; i < priv->hw_data->num_rxports; ++i) { + for (i = 0; i < priv->hw_data->num_rxports; i++) { if (!priv->rxports[i]) continue; @@ -3233,7 +3217,7 @@ static void ub960_txport_free_ports(struct ub960_data *priv) { unsigned int nport; - for (nport = 0; nport < priv->hw_data->num_txports; ++nport) { + for (nport = 0; nport < priv->hw_data->num_txports; nport++) { struct ub960_txport *txport = priv->txports[nport]; if (!txport) @@ -3248,7 +3232,7 @@ static void ub960_rxport_free_ports(struct ub960_data *priv) { unsigned int nport; - for (nport = 0; nport < priv->hw_data->num_rxports; ++nport) { + for (nport = 0; nport < priv->hw_data->num_rxports; nport++) { struct ub960_rxport *rxport = priv->rxports[nport]; if (!rxport) @@ -3284,7 +3268,7 @@ static int ub960_parse_dt_base(struct ub960_data *priv) return 0; priv->atr.aliases = devm_kcalloc(dev, table_size, - sizeof(struct atr_alias_table_entry), + sizeof(*priv->atr.aliases), GFP_KERNEL); if (!priv->atr.aliases) return -ENOMEM; @@ -3302,7 +3286,7 @@ static int ub960_parse_dt_base(struct ub960_data *priv) return ret; } - for (i = 0; i < table_size; ++i) + for (i = 0; i < table_size; i++) priv->atr.aliases[i].alias_id = aliases[i]; kfree(aliases); @@ -3387,12 +3371,15 @@ ub960_parse_dt_rxport_link_properties(struct ub960_data *priv, "ti,strobe-pos", ret); return ret; } - } else if (strobe_pos < UB960_MIN_MANUAL_STROBE_POS || - strobe_pos > UB960_MAX_MANUAL_STROBE_POS) { - dev_err(dev, "rx%u: illegal 'strobe-pos' value: %d\n", nport, - strobe_pos); } else { - /* NOTE: ignored unless global manual strobe pos is set */ + if (strobe_pos < UB960_MIN_MANUAL_STROBE_POS || + strobe_pos > UB960_MAX_MANUAL_STROBE_POS) { + dev_err(dev, "rx%u: illegal 'strobe-pos' value: %d\n", + nport, strobe_pos); + return -EINVAL; + } + + /* NOTE: ignored unless global manual strobe pos is also set */ rxport->eq.strobe_pos = strobe_pos; if (!priv->strobe.manual) dev_warn(dev, @@ -3407,10 +3394,13 @@ ub960_parse_dt_rxport_link_properties(struct ub960_data *priv, "ti,eq-level", ret); return ret; } - } else if (eq_level > UB960_MAX_EQ_LEVEL) { - dev_err(dev, "rx%u: illegal 'ti,eq-level' value: %d\n", nport, - eq_level); } else { + if (eq_level > UB960_MAX_EQ_LEVEL) { + dev_err(dev, "rx%u: illegal 'ti,eq-level' value: %d\n", + nport, eq_level); + return -EINVAL; + } + rxport->eq.manual_eq = true; rxport->eq.manual.eq_level = eq_level; } @@ -3486,8 +3476,9 @@ static int ub960_parse_dt_rxport(struct ub960_data *priv, unsigned int nport, struct fwnode_handle *link_fwnode, struct fwnode_handle *ep_fwnode) { - static const char *vpoc_names[UB960_MAX_RX_NPORTS] = { "vpoc0", "vpoc1", - "vpoc2", "vpoc3" }; + static const char *vpoc_names[UB960_MAX_RX_NPORTS] = { + "vpoc0", "vpoc1", "vpoc2", "vpoc3" + }; struct device *dev = &priv->client->dev; struct ub960_rxport *rxport; int ret; @@ -3576,7 +3567,7 @@ static int ub960_parse_dt_rxports(struct ub960_data *priv) priv->strobe.manual = fwnode_property_read_bool(links_fwnode, "ti,manual-strobe"); - for (nport = 0; nport < priv->hw_data->num_rxports; ++nport) { + for (nport = 0; nport < priv->hw_data->num_rxports; nport++) { struct fwnode_handle *link_fwnode; struct fwnode_handle *ep_fwnode; @@ -3619,7 +3610,7 @@ static int ub960_parse_dt_txports(struct ub960_data *priv) u32 nport; int ret; - for (nport = 0; nport < priv->hw_data->num_txports; ++nport) { + for (nport = 0; nport < priv->hw_data->num_txports; nport++) { unsigned int port = nport + priv->hw_data->num_rxports; struct fwnode_handle *ep_fwnode; @@ -3696,7 +3687,7 @@ static int ub960_notify_bound(struct v4l2_async_notifier *notifier, return ret; } - for (i = 0; i < priv->hw_data->num_rxports; ++i) { + for (i = 0; i < priv->hw_data->num_rxports; i++) { if (priv->rxports[i] && !priv->rxports[i]->source.sd) { dev_dbg(dev, "Waiting for more subdevs to be bound\n"); return 0; @@ -3728,7 +3719,7 @@ static int ub960_v4l2_notifier_register(struct ub960_data *priv) v4l2_async_nf_init(&priv->notifier); - for (i = 0; i < priv->hw_data->num_rxports; ++i) { + for (i = 0; i < priv->hw_data->num_rxports; i++) { struct ub960_rxport *rxport = priv->rxports[i]; struct ub960_asd *asd; @@ -3791,7 +3782,7 @@ static int ub960_create_subdev(struct ub960_data *priv) priv->sd.entity.function = MEDIA_ENT_F_VID_IF_BRIDGE; priv->sd.entity.ops = &ub960_entity_ops; - for (i = 0; i < priv->hw_data->num_rxports + priv->hw_data->num_txports; ++i) { + for (i = 0; i < priv->hw_data->num_rxports + priv->hw_data->num_txports; i++) { priv->pads[i].flags = ub960_pad_is_sink(priv, i) ? MEDIA_PAD_FL_SINK : MEDIA_PAD_FL_SOURCE; @@ -4055,7 +4046,7 @@ static int ub960_probe(struct i2c_client *client) port_mask = 0; - for (nport = 0; nport < priv->hw_data->num_rxports; ++nport) { + for (nport = 0; nport < priv->hw_data->num_rxports; nport++) { struct ub960_rxport *rxport = priv->rxports[nport]; if (!rxport) -- 2.34.1
