> Wiadomość napisana przez Qu Wenruo <wqu@xxxxxxxx> w dniu 21.02.2023, o godz. 01:14: > > > > On 2023/2/21 02:25, Piotr Oniszczuk wrote: >>> Wiadomość napisana przez Qu Wenruo <wqu@xxxxxxxx <mailto:wqu@xxxxxxxx>> w dniu 04.02.2023, o godz. 09:47: >>> >>> This series is based on the existing upstream work from Sebastian >>> Reichel: >>> https://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-misc.git/log/?h=rk3588 <https://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-misc.git/log/?h=rk3588> >>> >>> And I'm a completely newbie to arm64 world, thus if there is something >>> wrong, feel free to point out and I'm pretty happy to learn from the >>> failure. >>> >>> [BACKGROUND] >>> RK3588S and RK3588 have PCIE supports, it's done by the following 3 >>> controllers: >>> >>> - PCIE2.0x1 lane @fe180000 (both RK3588S and RK3588) >>> - PCIE2.0x1 lane @fe190000 (both RK3588S and RK3588) >>> Thes two are all connected to a naneng combo phy each, normally shared >>> with SATA or USB. >>> >>> - PCIE2.0x1 lane @fe170000 (RK3588 exlusive) >>> This one is also connected to a naneng combo phy, normally shared >>> with SATA or USB. >>> >>> - PCIE3.0x4 lanes @fe15000 (RK3588 exclusive) >>> >>> And unlike other boards, ROCK5B is utilizing PCIE extensively, its >>> network controller (RTL8125 2.5Gbps Ethernet) is connected to the >>> PCIE2.0 lane at fe190000, and an M.2 slot is attached to the PCIE3.0x4 >>> lanes. >>> >>> [WORKING] >>> Currently the series is able to bring up the PCIE3.0x4 lanes and >>> properly boot from an NVME at that M.2 slot of Rock5B boards. >>> >>> [NOT WORKING] >>> All PCIE2.0 lanes connected to naneng combo phy are not working. >>> I tried forward porting the extra handling from downstream, but it only >>> results hanging at probing (causing RCU stall). >>> >>> [EXTRA WANRING] >>> - PCI MSI initialization warning >>> WARNING: CPU: 7 PID: 1 at drivers/pci/msi/msi.h:121 pci_msi_setup_msi_irqs+0x38/0x4c >>> >>> This seems to be caused by the fact that we are still using legcacy >>> msi irqs? >>> >>> I checked up the gic and its dts, can not figure out why (all pretty >>> the same just like rk3399 and rk3568). >>> Any help would be appreciated. >>> >>> - pci_bus 0000:01: busn_res: can not insert [bus 01-ff] under [bus 00-0f] (conflicts with (null) [bus 00-0f]) >>> The vendoer kernel also has this problem, but my RK3399 board with >>> upstream kernel didn't trigger this at all, but something else like: >>> >>> pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring >>> >>> Then: >>> >>> pci_bus 0000:01: busn_res: [bus 01-1f] end is updated to 01 >>> >>> Not sure if it's something missing or can be just ignored. >>> >>> [PCI DMESG] >>> With this patchset, the PCI initialization and nvme would look like this: >>> >>> [ 0.142984] rockchip-dw-pcie fe150000.pcie: host bridge /pcie@fe150000 ranges: >>> [ 0.143653] rockchip-dw-pcie fe150000.pcie: IO 0x00f0100000..0x00f01fffff -> 0x00f0100000 >>> [ 0.144463] rockchip-dw-pcie fe150000.pcie: MEM 0x00f0200000..0x00f0ffffff -> 0x00f0200000 >>> [ 0.145261] rockchip-dw-pcie fe150000.pcie: MEM 0x0900000000..0x093fffffff -> 0x0900000000 >>> [ 0.154022] rockchip-dw-pcie fe150000.pcie: iATU: unroll T, 8 ob, 8 ib, align 64K, limit 8G >>> [ 0.360415] rockchip-dw-pcie fe150000.pcie: PCIe Gen.3 x4 link up >>> [ 0.361099] rockchip-dw-pcie fe150000.pcie: PCI host bridge to bus 0000:00 >>> [ 0.361731] pci_bus 0000:00: root bus resource [bus 00-0f] >>> [ 0.362236] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xf0100000-0xf01fffff]) >>> [ 0.363113] pci_bus 0000:00: root bus resource [mem 0xf0200000-0xf0ffffff] >>> [ 0.363744] pci_bus 0000:00: root bus resource [mem 0x900000000-0x93fffffff pref] >>> [ 0.364450] pci 0000:00:00.0: [1d87:3588] type 01 class 0x060400 >>> [ 0.365005] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x3fffffff] >>> [ 0.365583] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x3fffffff] >>> [ 0.366159] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref] >>> [ 0.366801] pci 0000:00:00.0: supports D1 D2 >>> [ 0.367193] pci 0000:00:00.0: PME# supported from D0 D1 D3hot >>> [ 0.368647] pci_bus 0000:01: busn_res: can not insert [bus 01-ff] under [bus 00-0f] (conflicts with (null) [bus 00-0f]) >>> [ 0.369681] pci 0000:01:00.0: [1d97:5216] type 00 class 0x010802 >>> [ 0.370277] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit] >>> [ 0.370975] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] >>> [ 0.372130] pci 0000:00:00.0: BAR 0: no space for [mem size 0x40000000] >>> [ 0.372742] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x40000000] >>> [ 0.373381] pci 0000:00:00.0: BAR 1: no space for [mem size 0x40000000] >>> [ 0.373988] pci 0000:00:00.0: BAR 1: failed to assign [mem size 0x40000000] >>> [ 0.374628] pci 0000:00:00.0: BAR 14: assigned [mem 0xf0200000-0xf02fffff] >>> [ 0.375259] pci 0000:00:00.0: BAR 6: assigned [mem 0xf0300000-0xf030ffff pref] >>> [ 0.375923] pci 0000:01:00.0: BAR 6: assigned [mem 0xf0200000-0xf021ffff pref] >>> [ 0.376590] pci 0000:01:00.0: BAR 0: assigned [mem 0xf0220000-0xf022ffff 64bit] >>> [ 0.377281] pci 0000:00:00.0: PCI bridge to [bus 01-ff] >>> [ 0.377762] pci 0000:00:00.0: bridge window [mem 0xf0200000-0xf02fffff] >>> [ 0.426841] pcieport 0000:00:00.0: PME: Signaling with IRQ 33 >>> [ 0.427487] pcieport 0000:00:00.0: AER: enabled with IRQ 33 >>> [ 0.625353] nvme nvme0: pci function 0000:01:00.0 >>> [ 0.625774] nvme 0000:01:00.0: enabling device (0000 -> 0002) >>> [ 0.717069] nvme nvme0: Shutdown timeout set to 8 seconds >>> [ 0.723025] nvme nvme0: allocated 64 MiB host memory buffer. >>> [ 0.816820] nvme nvme0: 1/0/0 default/read/poll queues >>> [ 0.818079] sdhci-pltfm: SDHCI platform and OF driver helper >>> [ 0.820678] nvme0n1: p1 p2 >>> >>> >> Qu, all >> I’m playing with your work on my rock5b as I want to have working Eth on rock5b. >> My code is from https://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-misc.git/log/?h=rk3588 <https://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-misc.git/log/?h=rk3588> + your’s PCIE3 patches. >> SBC boots from sd card, I see PCIE related logs in dmesg. but no rtl8125 is detected. >> PCIE logs are like this: >> 8.207810] rockchip-dw-pcie fe150000.pcie: host bridge /pcie@fe150000 ranges: >> [ 8.208501] rockchip-dw-pcie fe150000.pcie: Parsing ranges property... >> [ 8.209089] rockchip-dw-pcie fe150000.pcie: IO 0x00f0100000..0x00f01fffff -> 0x00f0100000 >> [ 8.209944] rockchip-dw-pcie fe150000.pcie: MEM 0x00f0200000..0x00f0ffffff -> 0x00f0200000 >> [ 8.210740] rockchip-dw-pcie fe150000.pcie: MEM 0x0900000000..0x093fffffff -> 0x0900000000 >> [ 8.218918] rockchip-dw-pcie fe150000.pcie: iATU: unroll T, 8 ob, 8 ib, align 64K, limit 8G >> [ 9.324473] rockchip-dw-pcie fe150000.pcie: Phy link never came up >> [ 9.325186] rockchip-dw-pcie fe150000.pcie: PCI host bridge to bus 0000:00 >> [ 9.325786] pci_bus 0000:00: root bus resource [bus 00-0f] >> [ 9.326266] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xf0100000-0xf01fffff]) >> [ 9.327097] pci_bus 0000:00: root bus resource [mem 0xf0200000-0xf0ffffff] >> [ 9.327713] pci_bus 0000:00: root bus resource [mem 0x900000000-0x93fffffff pref] >> [ 9.328364] pci_bus 0000:00: scanning bus >> [ 9.328729] pci 0000:00:00.0: [1d87:3588] type 01 class 0x060400 >> [ 9.329258] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x3fffffff] >> [ 9.329807] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x3fffffff] >> [ 9.330354] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref] >> [ 9.330984] pci 0000:00:00.0: supports D1 D2 >> [ 9.331356] pci 0000:00:00.0: PME# supported from D0 D1 D3hot >> [ 9.331858] pci 0000:00:00.0: PME# disabled >> [ 9.332309] pci 0000:00:00.0: vgaarb: pci_notify >> [ 9.333735] pci_bus 0000:00: fixups for bus >> [ 9.334106] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 0 >> [ 9.334731] pci_bus 0000:01: busn_res: can not insert [bus 01-ff] under [bus 00-0f] (conflicts with (null) [bus 00-0f]) >> [ 9.335668] pci_bus 0000:01: scanning bus >> [ 9.336052] pci_bus 0000:01: fixups for bus >> [ 9.336416] pci_bus 0000:01: bus scan returning with max=01 >> [ 9.336903] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 1 >> [ 9.337503] pci_bus 0000:00: bus scan returning with max=ff >> [ 9.337994] pci 0000:00:00.0: BAR 0: no space for [mem size 0x40000000] >> [ 9.338570] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x40000000] >> [ 9.339175] pci 0000:00:00.0: BAR 1: no space for [mem size 0x40000000] >> [ 9.339749] pci 0000:00:00.0: BAR 1: failed to assign [mem size 0x40000000] >> [ 9.340356] pci 0000:00:00.0: BAR 6: assigned [mem 0xf0200000-0xf020ffff pref] >> [ 9.340991] pci 0000:00:00.0: PCI bridge to [bus 01-ff] >> and nothing more :-( >> Are you progressing maybe with pcie on rock5b? > fe150000 is the PCIE3.0 controller, on Rock5B, that's the M.2 slot. > > But for R8125, it's on a PCIE2.0 controller, which is using naneng combo phy. > > I'm not able to bring the PCIE2.0 part up yet, it always hangs at PCIE2.0 initialization, thus only the PCIE3.0 part is submitted to the list. > > Thanks, > Qu Yes. Indeed. I'm trying to add pci2.0 and it looks i meet the same problem probably. I backported (from well working neggles quartz64pro repo I assume): https://github.com/neggles/linux-quartz64/commit/2ad84e89fc75b82c783345b72c97f5d7e3d45723 https://github.com/neggles/linux-quartz64/commit/4ac44c2b53758eca671d695d19b456d1849d7e14 https://github.com/neggles/linux-quartz64/commit/714c5e01d8f0f73b3a49cbdee29e3ffe0f3353dd https://github.com/neggles/linux-quartz64/commit/64971f9c85f27e29c44b31a0c326ea4bb8ec3c56 then i added rock5b pcie dt enablements (basing on radxa BSP): https://github.com/warpme/minimyth2/blob/master/script/kernel/linux-6.2/files/1058-arm64-dts-rockchip-enable-pcie-rock5b.patch this gives me quite clean 6.2 mainline boot log with hang at pcie2 init (pls see below) I assume https://github.com/neggles/linux-quartz64/commits/linux-quartz64 repo works well on Quartsz64 board - so I indirectly assume above backports should give us working pice2.0. It fails on rock5b - so I conclude: issue/error is on my side and is related to my rock5b specifics. Unfortunately I don’t owe Quartz64 board so can't verify correctness of my backports by testing on Quartz64pro. I’m curious about opinion of smarter than me guys… my kernel log: Starting kernel ... [ 0.000000] efi: UEFI not found. [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000200000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000efffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000001ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000001ffffffff] [ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000ec000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 29 pages/cpu s80872 r8192 d29720 u118784 [ 0.000000] pcpu-alloc: s80872 r8192 d29720 u118784 alloc=29*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: detected: Qualcomm erratum 1009, or ARM erratum 1286807, 2441009 [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1999368 [ 0.000000] Kernel command line: root=/dev/mmcblk1p2 rw rootwait earlycon=uart8250,mmio32,0xfeb50000 console=ttyS2,1500000n8 debug MM_DEBUG="yes" [ 0.000000] Unknown kernel command line parameters "MM_DEBUG=yes", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: area num 8. [ 0.000000] software IO TLB: mapped [mem 0x00000000e8000000-0x00000000ec000000] (64MB) [ 0.000000] Memory: 7803944K/8124416K available (14592K kernel code, 3524K rwdata, 6420K rodata, 6720K init, 576K bss, 254936K reserved, 65536K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] ftrace: allocating 51240 entries in 201 pages [ 0.000000] ftrace: allocated 201 pages with 4 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] .Trampoline variant of Tasks RCU enabled. [ 0.000000] .Rude variant of Tasks RCU enabled. [ 0.000000] .Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 480 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: GICv3 features: 16 PPIs [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000 [ 0.000000] ITS [mem 0xfe640000-0xfe65ffff] [ 0.000000] GIC: enabling workaround for ITS: Rockchip RK3568 force no_local_cache [ 0.000000] ITS@0x00000000fe640000: allocated 8192 Devices @210000 (indirect, esz 8, psz 64K, shr 0) [ 0.000000] ITS@0x00000000fe640000: allocated 32768 Interrupt Collections @220000 (flat, esz 2, psz 64K, shr 0) [ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] ITS [mem 0xfe660000-0xfe67ffff] [ 0.000000] GIC: enabling workaround for ITS: Rockchip RK3568 force no_local_cache [ 0.000000] ITS@0x00000000fe660000: allocated 8192 Devices @240000 (indirect, esz 8, psz 64K, shr 0) [ 0.000000] ITS@0x00000000fe660000: allocated 32768 Interrupt Collections @250000 (flat, esz 2, psz 64K, shr 0) [ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] ITS ALLOCATE PROP WORKAROUND [ 0.000000] GICv3: using LPI property table @0x0000000000260000 [ 0.000000] GIC: using cache flushing for LPI property table [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000000270000 [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@100[1] /cpus/cpu@200[2] /cpus/cpu@300[3] } [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@400[4] /cpus/cpu@500[5] /cpus/cpu@600[6] /cpus/cpu@700[7] } [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.001642] Console: colour dummy device 80x25 [ 0.002112] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000) [ 0.003044] pid_max: default: 32768 minimum: 301 [ 0.003584] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.004286] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006812] cblist_init_generic: Setting adjustable number of callback queues. [ 0.007472] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.008124] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.008787] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.009551] rcu: Hierarchical SRCU implementation. [ 0.009987] rcu: .Max phase no-delay instances is 1000. [ 0.011795] Platform MSI: msi-controller@fe640000 domain created [ 0.012382] Platform MSI: msi-controller@fe660000 domain created [ 0.013066] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe640000 domain created [ 0.013841] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe660000 domain created [ 0.015804] EFI services will not be available. [ 0.016811] smp: Bringing up secondary CPUs ... [ 0.017822] Detected VIPT I-cache on CPU1 [ 0.017887] GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000 [ 0.017899] GICv3: CPU1: using allocated LPI pending table @0x0000000000280000 [ 0.017937] CPU1: Booted secondary processor 0x0000000100 [0x412fd050] [ 0.018627] Detected VIPT I-cache on CPU2 [ 0.018687] GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000 [ 0.018698] GICv3: CPU2: using allocated LPI pending table @0x0000000000290000 [ 0.018733] CPU2: Booted secondary processor 0x0000000200 [0x412fd050] [ 0.019427] Detected VIPT I-cache on CPU3 [ 0.019486] GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000 [ 0.019497] GICv3: CPU3: using allocated LPI pending table @0x00000000002a0000 [ 0.019529] CPU3: Booted secondary processor 0x0000000300 [0x412fd050] [ 0.020182] CPU features: detected: Spectre-v4 [ 0.020186] CPU features: detected: Spectre-BHB [ 0.020189] Detected PIPT I-cache on CPU4 [ 0.020223] GICv3: CPU4: found redistributor 400 region 0:0x00000000fe700000 [ 0.020231] GICv3: CPU4: using allocated LPI pending table @0x00000000002b0000 [ 0.020251] CPU4: Booted secondary processor 0x0000000400 [0x414fd0b0] [ 0.020868] Detected PIPT I-cache on CPU5 [ 0.020907] GICv3: CPU5: found redistributor 500 region 0:0x00000000fe720000 [ 0.020914] GICv3: CPU5: using allocated LPI pending table @0x00000000002c0000 [ 0.020935] CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0] [ 0.021554] Detected PIPT I-cache on CPU6 [ 0.021592] GICv3: CPU6: found redistributor 600 region 0:0x00000000fe740000 [ 0.021599] GICv3: CPU6: using allocated LPI pending table @0x00000000002d0000 [ 0.021619] CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0] [ 0.022222] Detected PIPT I-cache on CPU7 [ 0.022262] GICv3: CPU7: found redistributor 700 region 0:0x00000000fe760000 [ 0.022269] GICv3: CPU7: using allocated LPI pending table @0x00000000002e0000 [ 0.022290] CPU7: Booted secondary processor 0x0000000700 [0x414fd0b0] [ 0.022353] smp: Brought up 1 node, 8 CPUs [ 0.039159] SMP: Total of 8 processors activated. [ 0.039588] CPU features: detected: 32-bit EL0 Support [ 0.040053] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.040827] CPU features: detected: Common not Private translations [ 0.041404] CPU features: detected: CRC32 instructions [ 0.041869] CPU features: detected: RCpc load-acquire (LDAPR) [ 0.042386] CPU features: detected: LSE atomic instructions [ 0.042886] CPU features: detected: Privileged Access Never [ 0.043389] CPU features: detected: RAS Extension Support [ 0.043880] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.044543] spectre-bhb mitigation disabled by compile time option [ 0.045156] CPU: All CPU(s) started at EL2 [ 0.045530] alternatives: applying system-wide alternatives [ 0.049962] devtmpfs: initialized [ 0.056059] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.056955] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.058021] pinctrl core: initialized pinctrl subsystem [ 0.058735] DMI not present or invalid. [ 0.059290] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.060548] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.061386] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.062270] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.063020] audit: initializing netlink subsys (disabled) [ 0.063616] audit: type=2000 audit(0.059:1): state=initialized audit_enabled=0 res=1 [ 0.064188] thermal_sys: Registered thermal governor 'fair_share' [ 0.064321] thermal_sys: Registered thermal governor 'bang_bang' [ 0.064879] thermal_sys: Registered thermal governor 'step_wise' [ 0.065429] thermal_sys: Registered thermal governor 'user_space' [ 0.066001] cpuidle: using governor ladder [ 0.066937] cpuidle: using governor menu [ 0.067335] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.068059] ASID allocator initialised with 65536 entries [ 0.068921] Serial: AMBA PL011 UART driver [ 0.078586] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.079547] rockchip-gpio fd8a0000.gpio: probed /pinctrl/gpio@fd8a0000 [ 0.080262] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.081177] rockchip-gpio fec20000.gpio: probed /pinctrl/gpio@fec20000 [ 0.081877] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.082788] rockchip-gpio fec30000.gpio: probed /pinctrl/gpio@fec30000 [ 0.083509] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.084419] rockchip-gpio fec40000.gpio: probed /pinctrl/gpio@fec40000 [ 0.085117] gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.086028] rockchip-gpio fec50000.gpio: probed /pinctrl/gpio@fec50000 [ 0.089315] cryptd: max_cpu_qlen set to 1000 [ 0.090138] ACPI: Interpreter disabled. [ 0.147600] iommu: Default domain type: Translated [ 0.148049] iommu: DMA domain TLB invalidation policy: strict mode [ 0.148902] SCSI subsystem initialized [ 0.149323] usbcore: registered new interface driver usbfs [ 0.149836] usbcore: registered new interface driver hub [ 0.150335] usbcore: registered new device driver usb [ 0.150996] pps_core: LinuxPPS API ver. 1 registered [ 0.151450] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx> [ 0.152298] PTP clock support registered [ 0.152822] arm-scmi firmware:scmi: Enabled polling mode TX channel - prot_id:16 [ 0.153552] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled. [ 0.154173] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0 [ 0.155148] Advanced Linux Sound Architecture Driver Initialized. [ 0.156011] vgaarb: loaded [ 0.156430] clocksource: Switched to clocksource arch_sys_counter [ 0.157182] pnp: PnP ACPI: disabled [ 0.162252] NET: Registered PF_INET protocol family [ 0.162807] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.166343] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.167185] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.167898] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.168950] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.170880] TCP: Hash tables configured (established 65536 bind 65536) [ 0.171520] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.172259] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.173088] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.173861] RPC: Registered named UNIX socket transport module. [ 0.174405] RPC: Registered udp transport module. [ 0.174834] RPC: Registered tcp transport module. [ 0.175265] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.175856] NET: Registered PF_XDP protocol family [ 0.176298] PCI: CLS 0 bytes, default 64 [ 0.177335] hw perfevents: enabled with armv8_cortex_a55 PMU driver, 7 counters available [ 0.178272] hw perfevents: enabled with armv8_cortex_a76 PMU driver, 7 counters available [ 0.179256] kvm [1]: IPA Size Limit: 40 bits [ 0.179657] kvm [1]: GICv3: no GICV resource entry [ 0.180102] kvm [1]: disabling GICv2 emulation [ 0.180518] kvm [1]: GIC system register CPU interface enabled [ 0.181159] kvm [1]: vgic interrupt IRQ18 [ 0.181647] kvm [1]: VHE mode initialized successfully [ 0.537847] Initialise system trusted keyrings [ 0.538394] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.539013] zbud: loaded [ 0.539434] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.540171] NFS: Registering the id_resolver key type [ 0.540652] Key type id_resolver registered [ 0.541034] Key type id_legacy registered [ 0.541409] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.542023] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.563252] NET: Registered PF_ALG protocol family [ 0.563695] Key type asymmetric registered [ 0.564071] Asymmetric key parser 'x509' registered [ 0.564518] Asymmetric key parser 'pkcs8' registered [ 0.564973] Key type pkcs7_test registered [ 0.565368] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.566148] io scheduler mq-deadline registered [ 0.566569] io scheduler kyber registered [ 0.566944] io scheduler bfq registered [ 0.571636] dw-pcie a41000000.pcie: host bridge /pcie@fe190000 ranges: [ 0.572241] dw-pcie a41000000.pcie: Parsing ranges property... [ 0.572780] dw-pcie a41000000.pcie: IO 0x00f4100000..0x00f41fffff -> 0x00f4100000 [ 0.573524] dw-pcie a41000000.pcie: MEM 0x00f4200000..0x00f4ffffff -> 0x00f4200000 [ 0.574259] dw-pcie a41000000.pcie: MEM 0x0a00000000..0x0a3fffffff -> 0x0a00000000 [ 65.195794] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
