Re: [PATCH V5 5/5] firmware: scm: Modify only the DLOAD bit in TCSR register for download mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 2/18/2023 1:19 AM, Mukesh Ojha wrote:


On 2/16/2023 7:30 PM, Mukesh Ojha wrote:


On 2/16/2023 5:30 PM, Poovendhan Selvaraj wrote:
CrashDump collection is based on the DLOAD bit of TCSR register.
To retain other bits, we read the register and modify only the DLOAD bit as
the other bits have their own significance.

Co-developed-by: Anusha Rao <quic_anusha@xxxxxxxxxxx>
Signed-off-by: Anusha Rao <quic_anusha@xxxxxxxxxxx>
Co-developed-by: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
Signed-off-by: Poovendhan Selvaraj <quic_poovendh@xxxxxxxxxxx>
---
  Changes in V5:
    - checking the return value in qcom_scm_set_download_mode function as
      suggested by Srinivas Kandagatla

  Changes in V4:
    - retain the orginal value of tcsr register when download mode
      is not set

  drivers/firmware/qcom_scm.c | 21 ++++++++++++++++-----
  1 file changed, 16 insertions(+), 5 deletions(-)

diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index 468d4d5ab550..d88c5f14bd54 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -407,7 +407,7 @@ int qcom_scm_set_remote_state(u32 state, u32 id)
  }
  EXPORT_SYMBOL(qcom_scm_set_remote_state);
-static int __qcom_scm_set_dload_mode(struct device *dev, bool enable)
+static int __qcom_scm_set_dload_mode(struct device *dev, u32 val, bool enable)
  {
      struct qcom_scm_desc desc = {
          .svc = QCOM_SCM_SVC_BOOT,
@@ -417,7 +417,8 @@ static int __qcom_scm_set_dload_mode(struct device *dev, bool enable)
          .owner = ARM_SMCCC_OWNER_SIP,
      };
-    desc.args[1] = enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0;
+    desc.args[1] = enable ? val | QCOM_SCM_BOOT_SET_DLOAD_MODE :
+                val & ~(QCOM_SCM_BOOT_SET_DLOAD_MODE);
      return qcom_scm_call_atomic(__scm->dev, &desc, NULL);
  }
@@ -426,15 +427,25 @@ static void qcom_scm_set_download_mode(bool enable)
  {
      bool avail;
      int ret = 0;
+    u32 dload_addr_val;
      avail = __qcom_scm_is_call_available(__scm->dev,
                           QCOM_SCM_SVC_BOOT,
                           QCOM_SCM_BOOT_SET_DLOAD_MODE);
+    ret = qcom_scm_io_readl(__scm->dload_mode_addr, &dload_addr_val);
+
+    if (ret) {
+        dev_err(__scm->dev,
+            "failed to read dload mode address value: %d\n", ret);
+        return;
+    }
+
      if (avail) {
-        ret = __qcom_scm_set_dload_mode(__scm->dev, enable);
+        ret = __qcom_scm_set_dload_mode(__scm->dev, dload_addr_val, enable);

Did you test this on a target where it comes under this if statement? does it really need to know dload_mode_addr for this target ?


Can we do something like this? I would let other review as well.

--------------------------------------->0-------------------------------------------
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index cdbfe54..26b7eda 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -419,6 +419,7 @@ static void qcom_scm_set_download_mode(bool enable)
 {
        bool avail;
        int ret = 0;
+       u32 dload_addr_val;

        avail = __qcom_scm_is_call_available(__scm->dev,
                                             QCOM_SCM_SVC_BOOT,
@@ -426,8 +427,16 @@ static void qcom_scm_set_download_mode(bool enable)
        if (avail) {
                ret = __qcom_scm_set_dload_mode(__scm->dev, enable);
        } else if (__scm->dload_mode_addr) {
-               ret = qcom_scm_io_writel(__scm->dload_mode_addr,
-                               enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0); +               ret = qcom_scm_io_readl(__scm->dload_mode_addr, &dload_addr_val);
+               if (ret) {
+                       dev_err(__scm->dev,
+                               "failed to read dload mode address value: %d\n", ret);
+                       return;
+               }
+
+               ret = qcom_scm_io_writel(__scm->dload_mode_addr, enable ?
+                               dload_addr_val | QCOM_SCM_BOOT_SET_DLOAD_MODE : +                               dload_addr_val & ~(QCOM_SCM_BOOT_SET_DLOAD_MODE));
        } else {
                dev_err(__scm->dev,
                        "No available mechanism for setting download mode\n");

-Mukesh

Okay sure..Agreed, will address this in the next patch.


-Mukesh
      } else if (__scm->dload_mode_addr) {
-        ret = qcom_scm_io_writel(__scm->dload_mode_addr,
-                enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0);
+        ret = qcom_scm_io_writel(__scm->dload_mode_addr, enable ?
+                dload_addr_val | QCOM_SCM_BOOT_SET_DLOAD_MODE :
+                dload_addr_val & ~(QCOM_SCM_BOOT_SET_DLOAD_MODE));
      } else {
          dev_err(__scm->dev,
              "No available mechanism for setting download mode\n");

Best Regards,
Poovendhan S



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux