On 20/02/2023 11:25, Kelvin Cheung wrote:
> On Mon, Feb 20, 2023 at 4:04 PM Krzysztof Kozlowski
> <krzysztof.kozlowski@xxxxxxxxxx> wrote:
>>
>> On 18/02/2023 13:22, Keguang Zhang wrote:
>>> Convert the Loongson1 interrupt controller dt-bindings to json-schema.
>>>
>>> Signed-off-by: Keguang Zhang <keguang.zhang@xxxxxxxxx>
>>> ---
>>> .../loongson,ls1x-intc.txt | 24 ---------
>>> .../loongson,ls1x-intc.yaml | 51 +++++++++++++++++++
>>> 2 files changed, 51 insertions(+), 24 deletions(-)
>>> delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
>>> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.yaml
>>>
>>> diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
>>> deleted file mode 100644
>>> index a63ed9fcb535..000000000000
>>> --- a/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
>>> +++ /dev/null
>>> @@ -1,24 +0,0 @@
>>> -Loongson ls1x Interrupt Controller
>>> -
>>> -Required properties:
>>> -
>>> -- compatible : should be "loongson,ls1x-intc". Valid strings are:
>>> -
>>> -- reg : Specifies base physical address and size of the registers.
>>> -- interrupt-controller : Identifies the node as an interrupt controller
>>> -- #interrupt-cells : Specifies the number of cells needed to encode an
>>> - interrupt source. The value shall be 2.
>>> -- interrupts : Specifies the CPU interrupt the controller is connected to.
>>> -
>>> -Example:
>>> -
>>> -intc: interrupt-controller@1fd01040 {
>>> - compatible = "loongson,ls1x-intc";
>>> - reg = <0x1fd01040 0x18>;
>>> -
>>> - interrupt-controller;
>>> - #interrupt-cells = <2>;
>>> -
>>> - interrupt-parent = <&cpu_intc>;
>>> - interrupts = <2>;
>>> -};
>>> diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.yaml
>>> new file mode 100644
>>> index 000000000000..4cea3ee9fbb1
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.yaml
>>> @@ -0,0 +1,51 @@
>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>>> +%YAML 1.2
>>> +---
>>> +$id: http://devicetree.org/schemas/interrupt-controller/loongson,ls1x-intc.yaml#
>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>> +
>>> +title: Loongson-1 Interrupt Controller
>>
>> You changed the title, so this binding now will cover all Loonson-1
>> interrupt controllers?
>>
> Yes.
OK, then with the dropped |
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Best regards,
Krzysztof
