On Wed, 15 Feb 2023 at 12:32, William Qiu <william.qiu@xxxxxxxxxxxxxxxx> wrote: > > Hi, > > This patchset adds initial rudimentary support for the StarFive > designware mobile storage host controller driver. And this driver will > be used in StarFive's VisionFive 2 board. The main purpose of adding > this driver is to accommodate the ultra-high speed mode of eMMC. > > The last patch should be applied after the patchset [1]: > [1] https://lore.kernel.org/all/20221220011247.35560-1-hal.feng@xxxxxxxxxxxxxxxx/ > > Changes v3->v4: > - Added documentation to describe StarFive System Controller Registers. > - Added aon_syscon and stg_syscon node. > - Fixed some checkpatch errors/warnings. > > Changes v2->v3: > - Wraped commit message according to Linux coding style. > - Rephrased the description of the patches. > - Changed the description of syscon regsiter. > - Dropped redundant properties. > > Changes v1->v2: > - Renamed the dt-binding 'starfive,jh7110-sdio.yaml' to 'starfive,jh7110-mmc.yaml'. > - Changed the type of 'starfive,syscon' and modify its description. > - Deleted unused head files like '#include <linux/gpio.h>'. > - Added comment for the 'rise_point' and 'fall_point'. > - Changed the API 'num_caps' to 'common_caps'. > - Changed the node name 'sys_syscon' to 'syscon'. > - Changed the node name 'sdio' to 'mmc'. > > The patch series is based on v6.1. > > William Qiu (4): > dt-bindings: mmc: Add StarFive MMC module > mmc: starfive: Add sdio/emmc driver support > riscv: dts: starfive: Add mmc node > dt-bindings: syscon: Add StarFive syscon doc > > .../bindings/mmc/starfive,jh7110-mmc.yaml | 77 ++++++++ > .../bindings/soc/starfive/jh7110-syscon.yaml | 51 +++++ > MAINTAINERS | 11 ++ > .../jh7110-starfive-visionfive-2.dtsi | 23 +++ > arch/riscv/boot/dts/starfive/jh7110.dtsi | 47 +++++ > drivers/mmc/host/Kconfig | 10 + > drivers/mmc/host/Makefile | 1 + > drivers/mmc/host/dw_mmc-starfive.c | 186 ++++++++++++++++++ > 8 files changed, 406 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mmc/starfive,jh7110-mmc.yaml > create mode 100644 Documentation/devicetree/bindings/soc/starfive/jh7110-syscon.yaml > create mode 100644 drivers/mmc/host/dw_mmc-starfive.c > I have dropped the v3 patches and applied patch1 and patch2 from the v4 series instead, for my next branch, thanks! Kind regards Uffe
