Re: [PATCH 2/2] arm64: dts: renesas: draak: Add overlay for CVBS input

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Geert,

On Tue, Feb 14, 2023 at 10:46:48AM +0100, Geert Uytterhoeven wrote:
> On Sat, Feb 11, 2023 at 5:58 PM Niklas Söderlund wrote:
> > From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
> >
> > The Draak board has an ADV7180 CVBS decoder and an ADV7612 HDMI decoder,
> > both connected to the same VIN input. DIP switches are used to select
> > one of the two devices, with the HDMI decoder being the default. Add an
> > overlay that selects the CVBS decoder.
> >
> > Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
> > [Niklas: Inverted it from HDMI to CVBS]
> > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
> 
> Thanks for your patch!
> Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> 
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/renesas/draak-cvbs-input.dtso
> > @@ -0,0 +1,33 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +/*
> > + * Copyright 2023 Ideas on Board Oy
> > + *
> > + * Device tree overlay for the Draak board, to enable CVBS input. This requires
> > + * setting DIP switches SW49, SW50, SW51 and SW52 to OFF, and SW53 and SW54 to
> > + * ON.
> > + */
> > +
> > +/dts-v1/;
> > +/plugin/;
> > +
> > +&adv7180_out {
> > +       remote-endpoint = <&vin4_in>;
> > +};
> 
> [...]
> 
> > +&vin4_in {
> > +       remote-endpoint = <&adv7180_out>;
> > +};
> 
> Unfortunately dtc doesn't like references to nodes it cannot find the
> names of:
> 
>     arch/arm64/boot/dts/renesas/draak-cvbs-input.dtbo: Warning
> (graph_port): /fragment@0: graph port node name should be 'port'
>     arch/arm64/boot/dts/renesas/draak-cvbs-input.dtbo: Warning
> (graph_port): /fragment@2: graph port node name should be 'port'
>     arch/arm64/boot/dts/renesas/draak-cvbs-input.dtso:13.14-15.3:
> Warning (graph_endpoint): /fragment@0/__overlay__: graph endpoint node
> name should be 'endpoint'
>     arch/arm64/boot/dts/renesas/draak-cvbs-input.dtso:27.10-29.3:
> Warning (graph_endpoint): /fragment@2/__overlay__: graph endpoint node
> name should be 'endpoint'
> 
> Do you think it would be worthwhile to add more hierarchy (like in
> arch/arm64/boot/dts/renesas/draak-ebisu-panel-aa104xd12.dtso), to get
> rid of the dtc warnings?

We could, but I think this is an issue that will need to somehow be
fixed in dtc. There are lots of warnings when compiling overlays, they
can only be validated when applied to a base DT.

-- 
Regards,

Laurent Pinchart



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux