Convert the Amlogic Virtual RTC bindings to dt-schema. Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx> --- .../bindings/rtc/amlogic,meson-vrtc.yaml | 42 ++++++++++++++++++++++ .../devicetree/bindings/rtc/rtc-meson-vrtc.txt | 22 ------------ 2 files changed, 42 insertions(+), 22 deletions(-) diff --git a/Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml b/Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml new file mode 100644 index 000000000000..1d5694c08965 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/amlogic,meson-vrtc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Virtual RTC (VRTC) + +maintainers: + - Neil Armstrong <neil.armstrong@xxxxxxxxxx> + +description: + The interface is 1 register where an alarm time (in seconds) is to be written. + + The alarm register is a simple scratch register shared between the + application processors (AP) and the secure co-processor (SCP). + When the AP suspends, the SCP will use the value of this register to + program an always-on timer before going sleep. When the timer expires, + the SCP will wake up and will then wake the AP. + +allOf: + - $ref: rtc.yaml# + +properties: + compatible: + const: amlogic,meson-vrtc + + reg: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + vrtc: rtc@a8 { + compatible = "amlogic,meson-vrtc"; + reg = <0x000a8 0x4>; + }; diff --git a/Documentation/devicetree/bindings/rtc/rtc-meson-vrtc.txt b/Documentation/devicetree/bindings/rtc/rtc-meson-vrtc.txt deleted file mode 100644 index c014f54a9853..000000000000 --- a/Documentation/devicetree/bindings/rtc/rtc-meson-vrtc.txt +++ /dev/null @@ -1,22 +0,0 @@ -* Amlogic Virtual RTC (VRTC) - -This is a Linux interface to an RTC managed by firmware, hence it's -virtual from a Linux perspective. The interface is 1 register where -an alarm time (in seconds) is to be written. - -Required properties: -- compatible: should be "amlogic,meson-vrtc" -- reg: physical address for the alarm register - -The alarm register is a simple scratch register shared between the -application processors (AP) and the secure co-processor (SCP.) When -the AP suspends, the SCP will use the value of this register to -program an always-on timer before going sleep. When the timer expires, -the SCP will wake up and will then wake the AP. - -Example: - - vrtc: rtc@0a8 { - compatible = "amlogic,meson-vrtc"; - reg = <0x0 0x000a8 0x0 0x4>; - }; -- 2.34.1
