status=okay is by default for new nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
arch/arm/boot/dts/exynos5250-arndale.dts | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 71c0e87d3a1d..e995cfee03f3 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -623,7 +623,6 @@ &soc {
i2c_ddc: i2c-10 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_gpio_bus>;
- status = "okay";
compatible = "i2c-gpio";
sda-gpios = <&gpa0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpa0 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
--
2.34.1
