The MIPI phy is actually part of the Power Management Unit system
controller. It does not have its own address space, thus keeping the
node under soc causes warnings:
exynos3250-artik5-eval.dtb: soc: video-phy: {'compatible': ['samsung,s5pv210-mipi-video-phy'],
'#phy-cells': [[1]], 'syscon': [[15]], 'phandle': [[23]]} should not be valid under {'type': 'object'}
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
arch/arm/boot/dts/exynos3250.dtsi | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 28bb2ce8ccf7..cb2c59c98c4a 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -346,7 +346,7 @@ sys_reg: syscon@10010000 {
};
pmu_system_controller: system-controller@10020000 {
- compatible = "samsung,exynos3250-pmu", "syscon";
+ compatible = "samsung,exynos3250-pmu", "simple-mfd", "syscon";
reg = <0x10020000 0x4000>;
interrupt-controller;
#interrupt-cells = <3>;
@@ -354,12 +354,11 @@ pmu_system_controller: system-controller@10020000 {
clock-names = "clkout8";
clocks = <&cmu CLK_FIN_PLL>;
#clock-cells = <1>;
- };
- mipi_phy: video-phy {
- compatible = "samsung,s5pv210-mipi-video-phy";
- #phy-cells = <1>;
- syscon = <&pmu_system_controller>;
+ mipi_phy: mipi-phy {
+ compatible = "samsung,s5pv210-mipi-video-phy";
+ #phy-cells = <1>;
+ };
};
pd_cam: power-domain@10023c00 {
--
2.34.1
