[PATCH] Revert "arm64: dts: ls1028a: sl28: get MAC addresses from VPD"

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



With commit b203e6f1e833 ("arm64: dts: ls1028a: sl28: get MAC addresses
from VPD"), the network adapter now depends on the nvmem device to be
present, which isn't the case and thus breaks networking on this board.
Revert it.

Fixes: b203e6f1e833 ("arm64: dts: ls1028a: sl28: get MAC addresses from VPD")
Signed-off-by: Michael Walle <michael@xxxxxxxx>
---
Shawn, unfortunately, the driver was NAKed, so this will break our
KernelCI setup. Alternatively, the original commit can just be dropped
from your tree, if that's how you do things like this. I've learned that
the correct way is to get the driver in and then in the next release enable
the driver and add it to the dts. Next time :)
---
 .../fsl-ls1028a-kontron-kbox-a-230-ls.dts       | 12 ------------
 .../freescale/fsl-ls1028a-kontron-sl28-var1.dts |  2 --
 .../freescale/fsl-ls1028a-kontron-sl28-var2.dts |  8 --------
 .../freescale/fsl-ls1028a-kontron-sl28-var4.dts |  2 --
 .../dts/freescale/fsl-ls1028a-kontron-sl28.dts  | 17 -----------------
 5 files changed, 41 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
index af9194eca556..73eb6061c73e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
@@ -56,14 +56,10 @@ qsgmii_phy3: ethernet-phy@10 {
 };
 
 &enetc_port2 {
-	nvmem-cells = <&base_mac_address 2>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
 &enetc_port3 {
-	nvmem-cells = <&base_mac_address 3>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -84,8 +80,6 @@ &mscc_felix_port0 {
 	managed = "in-band-status";
 	phy-handle = <&qsgmii_phy0>;
 	phy-mode = "qsgmii";
-	nvmem-cells = <&base_mac_address 4>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -94,8 +88,6 @@ &mscc_felix_port1 {
 	managed = "in-band-status";
 	phy-handle = <&qsgmii_phy1>;
 	phy-mode = "qsgmii";
-	nvmem-cells = <&base_mac_address 5>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -104,8 +96,6 @@ &mscc_felix_port2 {
 	managed = "in-band-status";
 	phy-handle = <&qsgmii_phy2>;
 	phy-mode = "qsgmii";
-	nvmem-cells = <&base_mac_address 6>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -114,8 +104,6 @@ &mscc_felix_port3 {
 	managed = "in-band-status";
 	phy-handle = <&qsgmii_phy3>;
 	phy-mode = "qsgmii";
-	nvmem-cells = <&base_mac_address 7>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
index 1f34c7553459..7cd29ab970d9 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
@@ -55,7 +55,5 @@ &enetc_port0 {
 &enetc_port1 {
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
-	nvmem-cells = <&base_mac_address 0>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
index aac41192caa1..113b1df74bf8 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
@@ -36,14 +36,10 @@ &enetc_port0 {
 };
 
 &enetc_port2 {
-	nvmem-cells = <&base_mac_address 2>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
 &enetc_port3 {
-	nvmem-cells = <&base_mac_address 3>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -56,8 +52,6 @@ &mscc_felix_port0 {
 	managed = "in-band-status";
 	phy-handle = <&phy0>;
 	phy-mode = "sgmii";
-	nvmem-cells = <&base_mac_address 0>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -66,8 +60,6 @@ &mscc_felix_port1 {
 	managed = "in-band-status";
 	phy-handle = <&phy1>;
 	phy-mode = "sgmii";
-	nvmem-cells = <&base_mac_address 1>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
index a4421db3784e..9b5e92fb753e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
@@ -43,7 +43,5 @@ vddh: vddh-regulator {
 &enetc_port1 {
 	phy-handle = <&phy1>;
 	phy-mode = "rgmii-id";
-	nvmem-cells = <&base_mac_address 1>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
index 8b65af4a7147..4ab17b984b03 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
@@ -92,8 +92,6 @@ &enetc_port0 {
 	phy-handle = <&phy0>;
 	phy-mode = "sgmii";
 	managed = "in-band-status";
-	nvmem-cells = <&base_mac_address 0>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -156,21 +154,6 @@ partition@3e0000 {
 				label = "bootloader environment";
 			};
 		};
-
-		otp-1 {
-			compatible = "user-otp";
-
-			nvmem-layout {
-				compatible = "kontron,sl28-vpd";
-
-				serial_number: serial-number {
-				};
-
-				base_mac_address: base-mac-address {
-					#nvmem-cell-cells = <1>;
-				};
-			};
-		};
 	};
 };
 
-- 
2.30.2




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux