Add the node describing the sn3193 that's used to provide notification
LED.
Unfortunately the driver currently supports neither multicolor API nor
using the properties function & color, so we use label instead.
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Signed-off-by: Luca Weiss <luca@xxxxxxxxx>
---
.../arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts | 28 ++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
index a4b5d680c097..8d2a054d8fee 100644
--- a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
+++ b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
@@ -114,6 +114,34 @@ led@0 {
default-brightness = <80>;
};
};
+
+ led-controller@68 {
+ compatible = "si-en,sn3193";
+ reg = <0x68>;
+
+ shutdown-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@1 {
+ reg = <1>;
+ label = "red:status";
+ led-max-microamp = <17500>;
+ };
+
+ led@2 {
+ reg = <2>;
+ label = "green:status";
+ led-max-microamp = <17500>;
+ };
+
+ led@3 {
+ reg = <3>;
+ label = "blue:status";
+ led-max-microamp = <17500>;
+ };
+ };
};
&blsp1_i2c6 {
--
2.39.1
