On 3 February 2023 04:02:54 GMT+01:00, yanhong wang <yanhong.wang@xxxxxxxxxxxxxxxx> wrote: > > >On 2023/1/19 7:21, Conor Dooley wrote: >> Hey Yanhong! >> >> On Wed, Jan 18, 2023 at 02:16:54PM +0800, Yanhong Wang wrote: >>> This series adds ethernet support for the StarFive JH7110 RISC-V SoC. The series >>> includes MAC driver. The MAC version is dwmac-5.20 (from Synopsys DesignWare). >>> For more information and support, you can visit RVspace wiki[1]. >>> >>> This patchset should be applied after the patchset [2], [3], [4]. >>> [1] https://wiki.rvspace.org/ >>> [2] https://lore.kernel.org/all/20221118010627.70576-1-hal.feng@xxxxxxxxxxxxxxxx/ >>> [3] https://lore.kernel.org/all/20221118011108.70715-1-hal.feng@xxxxxxxxxxxxxxxx/ >>> [4] https://lore.kernel.org/all/20221118011714.70877-1-hal.feng@xxxxxxxxxxxxxxxx/ >> >> I've got those series applied, albeit locally, since they're not ready, >> but I cannot get the Ethernet to work properly on my board. >> I boot all of my dev boards w/ tftp, and the visionfive2 is no exception. >> The fact that I am getting to the kernel in the first place means the >> ethernet is working in the factory supplied U-Boot [1]. >> >> However, in Linux this ethernet port does not appear to work at all. >> The other ethernet port is functional in Linux, but not in the factory >> supplied U-Boot. >> >> Is this a known issue? If it's not, I'll post the logs somewhere for >> you. In case it is relevant, my board is a v1.2a. >> >> Thanks, >> Conor. >> >> 1 - U-Boot 2021.10 (Oct 31 2022 - 12:11:37 +0800), Build: jenkins-VF2_515_Branch_SDK_Release-10 > > >No, this is not a issue. >These patches need to rely on the yt8531 phy driver of motorcomm company >and the corresponding clock delay configuration to work normally, >and the yt8531 phy driver is being submitted. I have applied the >motorcomm patchs during my test on board v1.2b, so the ethernet cannot work without >the application of the motorcomm patchs. > >For the patchs of yt8531, see [1] > >1 - https://patchwork.kernel.org/project/netdevbpf/cover/20230202030037.9075-1-Frank.Sae@xxxxxxxxxxxxxx/ Please put that info into the cover of the next round of your submission then. Thanks, Conor.
