Re: [PATCH 5/9] ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos4412

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 03.02.2023 22:12, Krzysztof Kozlowski wrote:
> On 03/02/2023 21:34, Krzysztof Kozlowski wrote:
>> On 03/02/2023 12:51, Marek Szyprowski wrote:
>>> On 03.02.2023 12:46, Krzysztof Kozlowski wrote:
>>>> On 03/02/2023 12:45, Marek Szyprowski wrote:
>>>>> On 29.01.2023 11:42, Krzysztof Kozlowski wrote:
>>>>>> On 25/01/2023 10:45, Krzysztof Kozlowski wrote:
>>>>>>> The soc node is supposed to have only device nodes with MMIO addresses,
>>>>>>> as reported by dtc W=1:
>>>>>>>
>>>>>>>      exynos4412.dtsi:407.20-413.5:
>>>>>>>        Warning (simple_bus_reg): /soc/bus-acp: missing or empty reg/ranges property
>>>>>>>
>>>>>>> and dtbs_check:
>>>>>>>
>>>>>>>      exynos4412-i9300.dtb: soc: bus-acp:
>>>>>>>        {'compatible': ['samsung,exynos-bus'], 'clocks': [[7, 456]], 'clock-names': ['bus'], 'operating-points-v2': [[132]], 'status': ['okay'], 'devfreq': [[117]]} should not be valid under {'type': 'object'}
>>>>>>>
>>>>>>> Move the bus nodes and their OPP tables out of SoC to fix this.
>>>>>>> Re-order them alphabetically while moving and put some of the OPP tables
>>>>>>> in device nodes (if they are not shared).
>>>>>>>
>>>>>> Applied.
>>>>> I don't have a good news. It looks that this change is responsible for
>>>>> breaking boards that were rock-stable so far, like Odroid U3. I didn't
>>>>> manage to analyze what exactly causes the issue, but it looks that the
>>>>> exynos-bus devfreq driver somehow depends on the order of the nodes:
>>>>>
>>>>> (before)
>>>>>
>>>>> # dmesg | grep exynos-bus
>>>>> [    6.415266] exynos-bus: new bus device registered: soc:bus-dmc
>>>>> (100000 KHz ~ 400000 KHz)
>>>>> [    6.422717] exynos-bus: new bus device registered: soc:bus-acp
>>>>> (100000 KHz ~ 267000 KHz)
>>>>> [    6.454323] exynos-bus: new bus device registered: soc:bus-c2c
>>>>> (100000 KHz ~ 400000 KHz)
>>>>> [    6.489944] exynos-bus: new bus device registered: soc:bus-leftbus
>>>>> (100000 KHz ~ 200000 KHz)
>>>>> [    6.493990] exynos-bus: new bus device registered: soc:bus-rightbus
>>>>> (100000 KHz ~ 200000 KHz)
>>>>> [    6.494612] exynos-bus: new bus device registered: soc:bus-display
>>>>> (160000 KHz ~ 200000 KHz)
>>>>> [    6.494932] exynos-bus: new bus device registered: soc:bus-fsys
>>>>> (100000 KHz ~ 134000 KHz)
>>>>> [    6.495246] exynos-bus: new bus device registered: soc:bus-peri (
>>>>> 50000 KHz ~ 100000 KHz)
>>>>> [    6.495577] exynos-bus: new bus device registered: soc:bus-mfc
>>>>> (100000 KHz ~ 200000 KHz)
>>>>>
>>>>> (after)
>>>>>
>>>>> # dmesg | grep exynos-bus
>>>>>
>>>>> [    6.082032] exynos-bus: new bus device registered: bus-dmc (100000
>>>>> KHz ~ 400000 KHz)
>>>>> [    6.122726] exynos-bus: new bus device registered: bus-leftbus
>>>>> (100000 KHz ~ 200000 KHz)
>>>>> [    6.146705] exynos-bus: new bus device registered: bus-mfc (100000
>>>>> KHz ~ 200000 KHz)
>>>>> [    6.181632] exynos-bus: new bus device registered: bus-peri ( 50000
>>>>> KHz ~ 100000 KHz)
>>>>> [    6.204770] exynos-bus: new bus device registered: bus-rightbus
>>>>> (100000 KHz ~ 200000 KHz)
>>>>> [    6.211087] exynos-bus: new bus device registered: bus-acp (100000
>>>>> KHz ~ 267000 KHz)
>>>>> [    6.216936] exynos-bus: new bus device registered: bus-c2c (100000
>>>>> KHz ~ 400000 KHz)
>>>>> [    6.225748] exynos-bus: new bus device registered: bus-display
>>>>> (160000 KHz ~ 200000 KHz)
>>>>> [    6.242978] exynos-bus: new bus device registered: bus-fsys (100000
>>>>> KHz ~ 134000 KHz)
>>>>>
>>>>> This is definitely a driver bug, but so far it worked fine, so this is a
>>>>> regression that need to be addressed somehow...
>>>> Thanks for checking, but what is exactly the bug? The devices registered
>>>> - just with different name.
>>> The bug is that the board fails to boot from time to time, freezing
>>> after registering PPMU counters...
>> My U3 with and without this patch, reports several warnings:
>> iommu_group_do_set_platform_dma()
>> exynos_iommu_domain_free()
>> clk_core_enable()
>>
>> and finally:
>> rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
>>
>> and keeps stalling.
>>
>> At least on next-20230203. Except all these (which anyway make board
>> unbootable) look fine around PMU and exynos-bus.
> I also booted few times my next/dt branch (with this patch) and no
> problems. How reproducible is the issue you experience?

IOMMU needs a fixup, that has been merged today:

https://lore.kernel.org/all/20230123093102.12392-1-m.szyprowski@xxxxxxxxxxx/

I was initially convinced that this freeze is somehow related to this 
IOMMU fixup, but it turned out that the devfreq is a source of the problems.

The freeze happens here about 1 of 10 boots, usually with kernel 
compiled from multi_v7_defconfig, while loading the PPMU modules. It 
happens on your next/dt branch too.

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux