On 03/02/2023 12:51, Marek Szyprowski wrote:
> On 03.02.2023 12:46, Krzysztof Kozlowski wrote:
>> On 03/02/2023 12:45, Marek Szyprowski wrote:
>>> On 29.01.2023 11:42, Krzysztof Kozlowski wrote:
>>>> On 25/01/2023 10:45, Krzysztof Kozlowski wrote:
>>>>> The soc node is supposed to have only device nodes with MMIO addresses,
>>>>> as reported by dtc W=1:
>>>>>
>>>>> exynos4412.dtsi:407.20-413.5:
>>>>> Warning (simple_bus_reg): /soc/bus-acp: missing or empty reg/ranges property
>>>>>
>>>>> and dtbs_check:
>>>>>
>>>>> exynos4412-i9300.dtb: soc: bus-acp:
>>>>> {'compatible': ['samsung,exynos-bus'], 'clocks': [[7, 456]], 'clock-names': ['bus'], 'operating-points-v2': [[132]], 'status': ['okay'], 'devfreq': [[117]]} should not be valid under {'type': 'object'}
>>>>>
>>>>> Move the bus nodes and their OPP tables out of SoC to fix this.
>>>>> Re-order them alphabetically while moving and put some of the OPP tables
>>>>> in device nodes (if they are not shared).
>>>>>
>>>> Applied.
>>> I don't have a good news. It looks that this change is responsible for
>>> breaking boards that were rock-stable so far, like Odroid U3. I didn't
>>> manage to analyze what exactly causes the issue, but it looks that the
>>> exynos-bus devfreq driver somehow depends on the order of the nodes:
>>>
>>> (before)
>>>
>>> # dmesg | grep exynos-bus
>>> [ 6.415266] exynos-bus: new bus device registered: soc:bus-dmc
>>> (100000 KHz ~ 400000 KHz)
>>> [ 6.422717] exynos-bus: new bus device registered: soc:bus-acp
>>> (100000 KHz ~ 267000 KHz)
>>> [ 6.454323] exynos-bus: new bus device registered: soc:bus-c2c
>>> (100000 KHz ~ 400000 KHz)
>>> [ 6.489944] exynos-bus: new bus device registered: soc:bus-leftbus
>>> (100000 KHz ~ 200000 KHz)
>>> [ 6.493990] exynos-bus: new bus device registered: soc:bus-rightbus
>>> (100000 KHz ~ 200000 KHz)
>>> [ 6.494612] exynos-bus: new bus device registered: soc:bus-display
>>> (160000 KHz ~ 200000 KHz)
>>> [ 6.494932] exynos-bus: new bus device registered: soc:bus-fsys
>>> (100000 KHz ~ 134000 KHz)
>>> [ 6.495246] exynos-bus: new bus device registered: soc:bus-peri (
>>> 50000 KHz ~ 100000 KHz)
>>> [ 6.495577] exynos-bus: new bus device registered: soc:bus-mfc
>>> (100000 KHz ~ 200000 KHz)
>>>
>>> (after)
>>>
>>> # dmesg | grep exynos-bus
>>>
>>> [ 6.082032] exynos-bus: new bus device registered: bus-dmc (100000
>>> KHz ~ 400000 KHz)
>>> [ 6.122726] exynos-bus: new bus device registered: bus-leftbus
>>> (100000 KHz ~ 200000 KHz)
>>> [ 6.146705] exynos-bus: new bus device registered: bus-mfc (100000
>>> KHz ~ 200000 KHz)
>>> [ 6.181632] exynos-bus: new bus device registered: bus-peri ( 50000
>>> KHz ~ 100000 KHz)
>>> [ 6.204770] exynos-bus: new bus device registered: bus-rightbus
>>> (100000 KHz ~ 200000 KHz)
>>> [ 6.211087] exynos-bus: new bus device registered: bus-acp (100000
>>> KHz ~ 267000 KHz)
>>> [ 6.216936] exynos-bus: new bus device registered: bus-c2c (100000
>>> KHz ~ 400000 KHz)
>>> [ 6.225748] exynos-bus: new bus device registered: bus-display
>>> (160000 KHz ~ 200000 KHz)
>>> [ 6.242978] exynos-bus: new bus device registered: bus-fsys (100000
>>> KHz ~ 134000 KHz)
>>>
>>> This is definitely a driver bug, but so far it worked fine, so this is a
>>> regression that need to be addressed somehow...
>>
>> Thanks for checking, but what is exactly the bug? The devices registered
>> - just with different name.
>
> The bug is that the board fails to boot from time to time, freezing
> after registering PPMU counters...
My U3 with and without this patch, reports several warnings:
iommu_group_do_set_platform_dma()
exynos_iommu_domain_free()
clk_core_enable()
and finally:
rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
and keeps stalling.
At least on next-20230203. Except all these (which anyway make board
unbootable) look fine around PMU and exynos-bus.
Best regards,
Krzysztof
