Am 1. Februar 2023 19:56:55 MEZ schrieb arinc9.unal@xxxxxxxxx:
>From: Arınç ÜNAL <arinc.unal@xxxxxxxxxx>
>
>Mux the MT7530 switch's phy0 to gmac5 which is wired to the SoC's gmac1.
>This achieves 2 Gbps total bandwidth to the CPU using the second RGMII.
>
>With this, the interface name to access phy0 changes from wan to eth1.
>
>Signed-off-by: Arınç ÜNAL <arinc.unal@xxxxxxxxxx>
>---
> arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 15 ++++++++++-----
> 1 file changed, 10 insertions(+), 5 deletions(-)
>
>diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
>index dc9b4f99eb8b..64700253fd35 100644
>--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
>+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
>@@ -182,6 +182,12 @@ fixed-link {
> };
> };
>
>+&gmac1 {
>+ status = "okay";
>+ phy-mode = "rgmii";
>+ phy-handle = <ðphy0>;
>+};
>+
> ð {
> status = "okay";
>
>@@ -189,6 +195,10 @@ mdio-bus {
> #address-cells = <1>;
> #size-cells = <0>;
>
>+ ethphy0: ethernet-phy@0 {
>+ reg = <0>;
>+ };
>+
> switch@1f {
> compatible = "mediatek,mt7530";
> reg = <0x1f>;
>@@ -200,11 +210,6 @@ ports {
> #address-cells = <1>;
> #size-cells = <0>;
>
>- port@0 {
>- reg = <0>;
>- label = "wan";
>- };
>-
> port@1 {
> reg = <1>;
> label = "lan0";
Hi
I still see Problem with "renaming" the wan from users PoV. I got another way of using second gmac for wan some time ago using vlan-aware bridge (have not tested with recent kernel versions).
Maybe this works for you too? If yes imho it will be a better way.
https://github.com/frank-w/BPI-Router-Linux/commit/c92b648bac996b34dc75a4fff15d7fb429bfe74b
Have same for r64/mt7622 in my tree...
It should use eth1 for wan-traffic too but is full userspace configuration without breaking userspace for users not wanting it.
regards Frank
