Re: [PATCH v3] ARM: dts: dove.dtsi: Move ethphy to fix schema error

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Michał Grzelak <mig@xxxxxxxxxxxx> writes:

> Running 'make dtbs_check' with schema in net/marvell,orion-mdio.yaml
> gives following warnings:
> mdio-bus@72004: Unevaluated properties are not allowed
> ('ethernet-phy' was unexpected)
> 	arch/arm/boot/dts/dove-cubox.dtb
> 	arch/arm/boot/dts/dove-cubox-es.dtb
> 	arch/arm/boot/dts/dove-d2plug.dtb
> 	arch/arm/boot/dts/dove-d2plug.dtb
> 	arch/arm/boot/dts/dove-dove-db.dtb
> 	arch/arm/boot/dts/dove-d3plug.dtb
> 	arch/arm/boot/dts/dove-sbc-a510.dtb
> As every subnode of mdio is expected to have an @X, ethernet-phy subnode
> in dove.dtsi doesn't have one. Fix these errors by moving ethernet-phy
> into relevant .dts files with correct @<reg address>.
>
> Signed-off-by: Michał Grzelak <mig@xxxxxxxxxxxx>

Applied on mvebu/dt

Thanks,

Gregory

> ---
> Changelog:
> v2->v3
> - edit commit message according to
>   https://lore.kernel.org/all/Y6zuJrb+8j+XCksN@xxxxxxx/
>
> v1->v2
> - remove patternProperties: from .yaml
> - move ethphy from dove.dtsi into relevant .dts files
>
>  arch/arm/boot/dts/dove-cm-a510.dtsi | 14 +++++++++++---
>  arch/arm/boot/dts/dove-cubox.dts    | 15 +++++++++++----
>  arch/arm/boot/dts/dove.dtsi         |  5 -----
>  3 files changed, 22 insertions(+), 12 deletions(-)
>
> diff --git a/arch/arm/boot/dts/dove-cm-a510.dtsi b/arch/arm/boot/dts/dove-cm-a510.dtsi
> index 9b9dfbe07be4..2f2f0a4bf004 100644
> --- a/arch/arm/boot/dts/dove-cm-a510.dtsi
> +++ b/arch/arm/boot/dts/dove-cm-a510.dtsi
> @@ -124,9 +124,17 @@ wifi_power: regulator@1 {
>  };
>  
>  /* Optional RTL8211D GbE PHY on SMI address 0x03 */
> -&ethphy {
> -	reg = <3>;
> -	status = "disabled";
> +&mdio {
> +	ethphy: ethernet-phy@3 {
> +		reg = <3>;
> +		status = "disabled";
> +	};
> +};
> +
> +&eth {
> +	ethernet-port@0 {
> +		phy-handle = <&ethphy>;
> +	};
>  };
>  
>  &i2c0 {
> diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
> index 2639b9fe0ab4..170c14d7f5c8 100644
> --- a/arch/arm/boot/dts/dove-cubox.dts
> +++ b/arch/arm/boot/dts/dove-cubox.dts
> @@ -72,11 +72,18 @@ gpu-subsystem {
>  &uart0 { status = "okay"; };
>  &sata0 { status = "okay"; };
>  &mdio { status = "okay"; };
> -&eth { status = "okay"; };
> +&eth {
> +	status = "okay";
> +	ethernet-port@0 {
> +		phy-handle = <&ethphy>;
> +	};
> +};
>  
> -&ethphy {
> -	compatible = "marvell,88e1310";
> -	reg = <1>;
> +&mdio {
> +	ethphy: ethernet-phy@1 {
> +		compatible = "marvell,88e1310";
> +		reg = <1>;
> +	};
>  };
>  
>  &gpu {
> diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
> index 00a36fba2fd2..c7a3fa33c56e 100644
> --- a/arch/arm/boot/dts/dove.dtsi
> +++ b/arch/arm/boot/dts/dove.dtsi
> @@ -382,7 +382,6 @@ ethernet-port@0 {
>  					interrupts = <29>;
>  					/* overwrite MAC address in bootloader */
>  					local-mac-address = [00 00 00 00 00 00];
> -					phy-handle = <&ethphy>;
>  				};
>  			};
>  
> @@ -394,10 +393,6 @@ mdio: mdio-bus@72004 {
>  				interrupts = <30>;
>  				clocks = <&gate_clk 2>;
>  				status = "disabled";
> -
> -				ethphy: ethernet-phy {
> -					/* set phy address in board file */
> -				};
>  			};
>  
>  			sdio0: sdio-host@92000 {
> -- 
> 2.34.1
>

-- 
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux