Add ethernet refclock mux support and set it to internal clock by
default. This configuration will not affect existing boards.
clock tree before this patch:
fec1 <- enet1_ref_125m (gate) <- enet1_ref (divider) <-,
|- pll6_enet
fec2 <- enet2_ref_125m (gate) <- enet2_ref (divider) <-´
after this patch:
fec1 <- enet1_ref_sel(mux) <- enet1_ref_125m (gate) <- ...
`--<> enet1_ref_pad |- pll6_enet
fec2 <- enet2_ref_sel(mux) <- enet2_ref_125m (gate) <- ...
`--<> enet2_ref_pad
Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
Acked-by: Lee Jones <lee@xxxxxxxxxx>
Reviewed-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
---
drivers/clk/imx/clk-imx6ul.c | 26 +++++++++++++++++++++
include/dt-bindings/clock/imx6ul-clock.h | 6 ++++-
include/linux/mfd/syscon/imx6q-iomuxc-gpr.h | 6 +++--
3 files changed, 35 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/imx/clk-imx6ul.c b/drivers/clk/imx/clk-imx6ul.c
index c3c465c1b0e7..2836adb817b7 100644
--- a/drivers/clk/imx/clk-imx6ul.c
+++ b/drivers/clk/imx/clk-imx6ul.c
@@ -10,6 +10,7 @@
#include <linux/err.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
@@ -94,6 +95,17 @@ static const struct clk_div_table video_div_table[] = {
{ }
};
+static const char * enet1_ref_sels[] = { "enet1_ref_125m", "enet1_ref_pad", };
+static const u32 enet1_ref_sels_table[] = { IMX6UL_GPR1_ENET1_TX_CLK_DIR,
+ IMX6UL_GPR1_ENET1_CLK_SEL };
+static const u32 enet1_ref_sels_table_mask = IMX6UL_GPR1_ENET1_TX_CLK_DIR |
+ IMX6UL_GPR1_ENET1_CLK_SEL;
+static const char * enet2_ref_sels[] = { "enet2_ref_125m", "enet2_ref_pad", };
+static const u32 enet2_ref_sels_table[] = { IMX6UL_GPR1_ENET2_TX_CLK_DIR,
+ IMX6UL_GPR1_ENET2_CLK_SEL };
+static const u32 enet2_ref_sels_table_mask = IMX6UL_GPR1_ENET2_TX_CLK_DIR |
+ IMX6UL_GPR1_ENET2_CLK_SEL;
+
static u32 share_count_asrc;
static u32 share_count_audio;
static u32 share_count_sai1;
@@ -472,6 +484,17 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
/* mask handshake of mmdc */
imx_mmdc_mask_handshake(base, 0);
+ hws[IMX6UL_CLK_ENET1_REF_PAD] = imx_obtain_fixed_of_clock(ccm_node, "enet1_ref_pad", 0);
+
+ hws[IMX6UL_CLK_ENET1_REF_SEL] = imx_clk_gpr_mux("enet1_ref_sel", "fsl,imx6ul-iomuxc-gpr",
+ IOMUXC_GPR1, enet1_ref_sels, ARRAY_SIZE(enet1_ref_sels),
+ enet1_ref_sels_table, enet1_ref_sels_table_mask);
+ hws[IMX6UL_CLK_ENET2_REF_PAD] = imx_obtain_fixed_of_clock(ccm_node, "enet2_ref_pad", 0);
+
+ hws[IMX6UL_CLK_ENET2_REF_SEL] = imx_clk_gpr_mux("enet2_ref_sel", "fsl,imx6ul-iomuxc-gpr",
+ IOMUXC_GPR1, enet2_ref_sels, ARRAY_SIZE(enet2_ref_sels),
+ enet2_ref_sels_table, enet2_ref_sels_table_mask);
+
imx_check_clk_hws(hws, IMX6UL_CLK_END);
of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_hw_data);
@@ -516,6 +539,9 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
clk_set_parent(hws[IMX6ULL_CLK_EPDC_PRE_SEL]->clk, hws[IMX6UL_CLK_PLL3_PFD2]->clk);
clk_set_parent(hws[IMX6UL_CLK_ENFC_SEL]->clk, hws[IMX6UL_CLK_PLL2_PFD2]->clk);
+
+ clk_set_parent(hws[IMX6UL_CLK_ENET1_REF_SEL]->clk, hws[IMX6UL_CLK_ENET_REF]->clk);
+ clk_set_parent(hws[IMX6UL_CLK_ENET2_REF_SEL]->clk, hws[IMX6UL_CLK_ENET2_REF]->clk);
}
CLK_OF_DECLARE(imx6ul, "fsl,imx6ul-ccm", imx6ul_clocks_init);
diff --git a/include/dt-bindings/clock/imx6ul-clock.h b/include/dt-bindings/clock/imx6ul-clock.h
index b44920f1edb0..66239ebc0e23 100644
--- a/include/dt-bindings/clock/imx6ul-clock.h
+++ b/include/dt-bindings/clock/imx6ul-clock.h
@@ -257,7 +257,11 @@
#define IMX6UL_CLK_GPIO5 248
#define IMX6UL_CLK_MMDC_P1_IPG 249
#define IMX6UL_CLK_ENET1_REF_125M 250
+#define IMX6UL_CLK_ENET1_REF_SEL 251
+#define IMX6UL_CLK_ENET1_REF_PAD 252
+#define IMX6UL_CLK_ENET2_REF_SEL 253
+#define IMX6UL_CLK_ENET2_REF_PAD 254
-#define IMX6UL_CLK_END 251
+#define IMX6UL_CLK_END 255
#endif /* __DT_BINDINGS_CLOCK_IMX6UL_H */
diff --git a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
index d4b5e527a7a3..09c6b3184bb0 100644
--- a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
+++ b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
@@ -451,8 +451,10 @@
#define IMX6SX_GPR12_PCIE_RX_EQ_2 (0x2 << 0)
/* For imx6ul iomux gpr register field define */
-#define IMX6UL_GPR1_ENET1_CLK_DIR (0x1 << 17)
-#define IMX6UL_GPR1_ENET2_CLK_DIR (0x1 << 18)
+#define IMX6UL_GPR1_ENET2_TX_CLK_DIR BIT(18)
+#define IMX6UL_GPR1_ENET1_TX_CLK_DIR BIT(17)
+#define IMX6UL_GPR1_ENET2_CLK_SEL BIT(14)
+#define IMX6UL_GPR1_ENET1_CLK_SEL BIT(13)
#define IMX6UL_GPR1_ENET1_CLK_OUTPUT (0x1 << 17)
#define IMX6UL_GPR1_ENET2_CLK_OUTPUT (0x1 << 18)
#define IMX6UL_GPR1_ENET_CLK_DIR (0x3 << 17)
--
2.30.2
