The MIPI phy is actually part of the Power Management Unit system
controller. It does not have own address space, thus keeping the node
under soc causes warnings:
exynos5433-tm2e.dtb: soc@0: video-phy: {'compatible': ['samsung,exynos5433-mipi-video-phy'], ...
should not be valid under {'type': 'object'}
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
arch/arm64/boot/dts/exynos/exynos5433.dtsi | 19 +++++++++----------
1 file changed, 9 insertions(+), 10 deletions(-)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 9da24fe958a3..842976addbd9 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -911,12 +911,20 @@ pinctrl_touch: pinctrl@14ce0000 {
};
pmu_system_controller: system-controller@105c0000 {
- compatible = "samsung,exynos5433-pmu", "syscon";
+ compatible = "samsung,exynos5433-pmu", "simple-mfd", "syscon";
reg = <0x105c0000 0x5008>;
#clock-cells = <1>;
clock-names = "clkout16";
clocks = <&xxti>;
+ mipi_phy: mipi-phy {
+ compatible = "samsung,exynos5433-mipi-video-phy";
+ #phy-cells = <1>;
+ samsung,cam0-sysreg = <&syscon_cam0>;
+ samsung,cam1-sysreg = <&syscon_cam1>;
+ samsung,disp-sysreg = <&syscon_disp>;
+ };
+
reboot: syscon-reboot {
compatible = "syscon-reboot";
regmap = <&pmu_system_controller>;
@@ -936,15 +944,6 @@ gic: interrupt-controller@11001000 {
interrupts = <GIC_PPI 9 0xf04>;
};
- mipi_phy: video-phy {
- compatible = "samsung,exynos5433-mipi-video-phy";
- #phy-cells = <1>;
- samsung,pmu-syscon = <&pmu_system_controller>;
- samsung,cam0-sysreg = <&syscon_cam0>;
- samsung,cam1-sysreg = <&syscon_cam1>;
- samsung,disp-sysreg = <&syscon_disp>;
- };
-
decon: decon@13800000 {
compatible = "samsung,exynos5433-decon";
reg = <0x13800000 0x2104>;
--
2.34.1
