The first patch in this series fixes an SD card (re)boot issue on the
BPI-M5. The second removes a redundant status from the sound node so
we don't carry it forward when subsequent patches convert the (fixed)
dts into a common dtsi, then add support for BPI-M2-PRO which is based
on the BPI-M5 board design.
Changes from v1:
- Added patch to remove sound node status in meson-sm1-bananapi-m5.dts
- Added Krzysztof's ack to bindings patch
- Revised meson-sm1-bananapi-m2-pro.dts to remove sound node status
- Minor wording changes
Christian Hewitt (5):
arm64: dts: meson: bananapi-m5: switch VDDIO_C pin to OPEN_DRAIN
arm64: dts: meson: bananapi-m5: remove redundant status from sound
node
arm64: dts: meson: bananapi-m5: convert dts to dtsi
dt-bindings: arm: amlogic: add support for BananaPi M2-Pro
arm64: dts: meson: add support for BananaPi M2-Pro
.../devicetree/bindings/arm/amlogic.yaml | 1 +
arch/arm64/boot/dts/amlogic/Makefile | 1 +
.../dts/amlogic/meson-sm1-bananapi-m2-pro.dts | 97 ++++
.../dts/amlogic/meson-sm1-bananapi-m5.dts | 428 +----------------
.../boot/dts/amlogic/meson-sm1-bananapi.dtsi | 435 ++++++++++++++++++
5 files changed, 535 insertions(+), 427 deletions(-)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
--
2.34.1
