[PATCH v2 1/3] dt-bindings: intel,ixp4xx-expansion-bus: split out peripheral properties

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The properties of devices in IXP4xx expansion bus need to be also
applied to actual devices' bindings.  Prepare for this by splitting them
to separate intel,ixp4xx-expansion-peripheral-props binding, just like
other memory-controller peripheral properties.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
 ...intel,ixp4xx-expansion-bus-controller.yaml | 64 +--------------
 ...tel,ixp4xx-expansion-peripheral-props.yaml | 80 +++++++++++++++++++
 .../mc-peripheral-props.yaml                  |  1 +
 3 files changed, 82 insertions(+), 63 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml

diff --git a/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.yaml b/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.yaml
index 5fb4e7bfa4da..a771796ec499 100644
--- a/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.yaml
+++ b/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.yaml
@@ -56,69 +56,7 @@ patternProperties:
     description: Devices attached to chip selects are represented as
       subnodes.
     type: object
-
-    properties:
-      intel,ixp4xx-eb-t1:
-        description: Address timing, extend address phase with n cycles.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        maximum: 3
-
-      intel,ixp4xx-eb-t2:
-        description: Setup chip select timing, extend setup phase with n cycles.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        maximum: 3
-
-      intel,ixp4xx-eb-t3:
-        description: Strobe timing, extend strobe phase with n cycles.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        maximum: 15
-
-      intel,ixp4xx-eb-t4:
-        description: Hold timing, extend hold phase with n cycles.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        maximum: 3
-
-      intel,ixp4xx-eb-t5:
-        description: Recovery timing, extend recovery phase with n cycles.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        maximum: 15
-
-      intel,ixp4xx-eb-cycle-type:
-        description: The type of cycles to use on the expansion bus for this
-          chip select. 0 = Intel cycles, 1 = Motorola cycles, 2 = HPI cycles.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        enum: [0, 1, 2]
-
-      intel,ixp4xx-eb-byte-access-on-halfword:
-        description: Allow byte read access on half word devices.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        enum: [0, 1]
-
-      intel,ixp4xx-eb-hpi-hrdy-pol-high:
-        description: Set HPI HRDY polarity to active high when using HPI.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        enum: [0, 1]
-
-      intel,ixp4xx-eb-mux-address-and-data:
-        description: Multiplex address and data on the data bus.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        enum: [0, 1]
-
-      intel,ixp4xx-eb-ahb-split-transfers:
-        description: Enable AHB split transfers.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        enum: [0, 1]
-
-      intel,ixp4xx-eb-write-enable:
-        description: Enable write cycles.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        enum: [0, 1]
-
-      intel,ixp4xx-eb-byte-access:
-        description: Expansion bus uses only 8 bits. The default is to use
-          16 bits.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        enum: [0, 1]
+    $ref: /schemas/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml#
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml b/Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml
new file mode 100644
index 000000000000..8f782c80e88b
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Peripheral properties for Intel IXP4xx Expansion Bus
+
+description: |
+  The IXP4xx expansion bus controller handles access to devices on the
+  memory-mapped expansion bus on the Intel IXP4xx family of system on chips,
+  including IXP42x, IXP43x, IXP45x and IXP46x.
+
+maintainers:
+  - Linus Walleij <linus.walleij@xxxxxxxxxx>
+
+properties:
+  intel,ixp4xx-eb-t1:
+    description: Address timing, extend address phase with n cycles.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 3
+
+  intel,ixp4xx-eb-t2:
+    description: Setup chip select timing, extend setup phase with n cycles.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 3
+
+  intel,ixp4xx-eb-t3:
+    description: Strobe timing, extend strobe phase with n cycles.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+
+  intel,ixp4xx-eb-t4:
+    description: Hold timing, extend hold phase with n cycles.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 3
+
+  intel,ixp4xx-eb-t5:
+    description: Recovery timing, extend recovery phase with n cycles.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+
+  intel,ixp4xx-eb-cycle-type:
+    description: The type of cycles to use on the expansion bus for this
+      chip select. 0 = Intel cycles, 1 = Motorola cycles, 2 = HPI cycles.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+
+  intel,ixp4xx-eb-byte-access-on-halfword:
+    description: Allow byte read access on half word devices.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  intel,ixp4xx-eb-hpi-hrdy-pol-high:
+    description: Set HPI HRDY polarity to active high when using HPI.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  intel,ixp4xx-eb-mux-address-and-data:
+    description: Multiplex address and data on the data bus.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  intel,ixp4xx-eb-ahb-split-transfers:
+    description: Enable AHB split transfers.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  intel,ixp4xx-eb-write-enable:
+    description: Enable write cycles.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  intel,ixp4xx-eb-byte-access:
+    description: Expansion bus uses only 8 bits. The default is to use
+      16 bits.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/memory-controllers/mc-peripheral-props.yaml b/Documentation/devicetree/bindings/memory-controllers/mc-peripheral-props.yaml
index 53ae995462db..5acfcad12bb7 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mc-peripheral-props.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/mc-peripheral-props.yaml
@@ -34,5 +34,6 @@ required:
 # The controller specific properties go here.
 allOf:
   - $ref: st,stm32-fmc2-ebi-props.yaml#
+  - $ref: intel,ixp4xx-expansion-peripheral-props.yaml#
 
 additionalProperties: true
-- 
2.34.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux