From: Michael Williamson <michael.williamson@xxxxxxxxxxxxxxxx> The logic to configure polling (vs async/irq notification) of hot-plug events was not correct. If the connected bridge requires polling, then inform the upstream bridge we also require polling. Signed-off-by: Michael Williamson <michael.williamson@xxxxxxxxxxxxxxxx> Signed-off-by: Jonathan Cormier <jcormier@xxxxxxxxxxxxxxxx> --- drivers/gpu/drm/bridge/ti-tfp410.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/bridge/ti-tfp410.c b/drivers/gpu/drm/bridge/ti-tfp410.c index 323a6d9ed188..837e1f81a0ff 100644 --- a/drivers/gpu/drm/bridge/ti-tfp410.c +++ b/drivers/gpu/drm/bridge/ti-tfp410.c @@ -155,7 +155,7 @@ static int tfp410_attach(struct drm_bridge *bridge, return -ENODEV; } - if (dvi->next_bridge->ops & DRM_BRIDGE_OP_DETECT) + if (dvi->next_bridge->ops & DRM_BRIDGE_OP_HPD) dvi->connector.polled = DRM_CONNECTOR_POLL_HPD; else dvi->connector.polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT; -- 2.25.1
