On Tue, Jan 24, 2023 at 4:31 PM AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx> wrote: > > Il 24/01/23 14:17, bchihi@xxxxxxxxxxxx ha scritto: > > From: Balsam CHIHI <bchihi@xxxxxxxxxxxx> > > > > The Low Voltage Thermal Sensor (LVTS) is a multiple sensors, multi > > controllers contained in a thermal domain. > > > > A thermal domains can be the MCU or the AP. > > > > Each thermal domains contain up to seven controllers, each thermal > > controller handle up to four thermal sensors. > > > > The LVTS has two Finite State Machines (FSM), one to handle the > > functionin temperatures range like hot or cold temperature and another > > one to handle monitoring trip point. The FSM notifies via interrupts > > when a trip point is crossed. > > > > The interrupt is managed at the thermal controller level, so when an > > interrupt occurs, the driver has to find out which sensor triggered > > such an interrupt. > > > > The sampling of the thermal can be filtered or immediate. For the > > former, the LVTS measures several points and applies a low pass > > filter. > > > > Signed-off-by: Balsam CHIHI <bchihi@xxxxxxxxxxxx> > > Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx> > > On MT8195 Tomato Chromebook: > Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx> Hi Angelo, Thank you for reviewing and testing it. Best regards, Balsam