On 11/10/2014 04:50 PM, Ezequiel Garcia wrote: > On 11/08/2014 09:57 AM, Jonathan Cameron wrote: >> On 05/11/14 21:56, Ezequiel Garcia wrote: >>> >>> diff --git a/Documentation/devicetree/bindings/iio/adc/cc_10001_adc.txt b/Documentation/devicetree/bindings/iio/adc/cc_10001_adc.txt >>> new file mode 100644 >>> index 0000000..6491839 >>> --- /dev/null >>> +++ b/Documentation/devicetree/bindings/iio/adc/cc_10001_adc.txt >>> @@ -0,0 +1,19 @@ >>> +* Cosmic Circuits - Analog to Digital Converter (CC-10001-ADC) >>> + >>> +Required properties: >>> + - compatible: Should be "cosmic,10001-adc" >>> + - reg: Should contain adc registers location and length. >>> + - cosmic,adc-available-channels: Bitmask of the channels currently enabled. >> I suspect there may be other preferred ways of doing this (child nodes perhaps >> for each enabled channel?) > > Hm, I'm not sure about this. As far I can recall, if a node has children > then it *must* be a bus, which is not the case. Of course, you'll find > examples doing this wrong. > On a second thought... I guess you meant something like this? adc: adc@18101600 { compatible = "cosmic,10001-adc"; reg = <0x18101600 0x24>; clocks = <&adc_clk>; clock-names = "adc"; vref-supply = <®_1v8>; cosmic,channels { #address-cells = <1>; #size-cells = <0>; channel@0 { reg = <0>; }; channel@1 { reg = <1>; }; }; }; Might be better, but I don't have a strong opinion on it. -- Ezequiel -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html