The uniphier-sd controller needs to control some siginals from the SD interface logic to transition to UHS mode. This series adds UHS mode support to the controller driver to refer to and control the interface logic registers, which include mode selector and SDR speed selector. Kunihiko Hayashi (5): dt-bindings: mmc: uniphier-sd: Add socionext,syscon-uhs-mode property mmc: uniphier-sd: Add control of UHS mode using SD interface logic mmc: uniphier-sd: Add control to switch UHS speed ARM: dts: uniphier: Add syscon-uhs-mode to SD node arm64: dts: uniphier: Add syscon-uhs-mode to SD node .../bindings/mmc/socionext,uniphier-sd.yaml | 10 +++ arch/arm/boot/dts/uniphier-ld4.dtsi | 3 +- arch/arm/boot/dts/uniphier-pro4.dtsi | 3 +- arch/arm/boot/dts/uniphier-pro5.dtsi | 3 +- arch/arm/boot/dts/uniphier-pxs2.dtsi | 3 +- arch/arm/boot/dts/uniphier-sld8.dtsi | 3 +- .../boot/dts/socionext/uniphier-ld20.dtsi | 3 +- .../boot/dts/socionext/uniphier-pxs3.dtsi | 3 +- drivers/mmc/host/uniphier-sd.c | 83 +++++++++++++++++-- 9 files changed, 102 insertions(+), 12 deletions(-) -- 2.25.1
