Fixes:
pmic@1c: '#clock-cells' is a required property
pmic@1c: 'switch-supply' does not match any of the regexes: 'pinctrl-[0-9]+'
The switch supply is described by vcc9-supply per bindings documentation.
Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---
arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts
index 1e40709610c5..c8e5a0a42b89 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts
@@ -381,6 +381,7 @@ rk818: pmic@1c {
reg = <0x1c>;
interrupt-parent = <&gpio_intc>;
interrupts = <7 IRQ_TYPE_LEVEL_LOW>; /* GPIOAO_7 */
+ #clock-cells = <1>;
vcc1-supply = <&vdd_sys>;
vcc2-supply = <&vdd_sys>;
@@ -391,7 +392,6 @@ rk818: pmic@1c {
vcc8-supply = <&vcc_2v3>;
vcc9-supply = <&vddao_3v3>;
boost-supply = <&vdd_sys>;
- switch-supply = <&vdd_sys>;
regulators {
vddcpu_a: DCDC_REG1 {
--
2.34.1
