Re: [PATCH v3 08/14] rtc: pcf2127: add support for PCF2131 interrupts on output INT_A

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 20 Jan 2023 17:56:39 +0100
Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx> wrote:

> On 15/12/2022 10:02:09-0500, Hugo Villeneuve wrote:
> > From: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>
> > 
> > The PCF2127 and PCF2129 have one output interrupt pin. The PCF2131 has
> > two, named INT_A and INT_B. The hardware support that any interrupt
> > source can be routed to either one or both of them.
> > 
> > Force all interrupt sources to go to the INT A pin.
> > 
> > Support to route any interrupt source to INT A/B pins is not supported
> > by this driver at the moment.
> > 
> 
> The main issue with this is that this will created a breaking change
> once someone needs support for INTB

We already had a discussion about this a while ago:

    https://lore.kernel.org/linux-rtc/7be3f9541eaed7e17e334267e49665f442b1b458.camel@xxxxxxxxxxxx/

What exactly do you suggest? I personnaly don't have any need for INTB at the moment and I would prefer to avoid the great complexity of supporting any combination of routing interrupts to any A ou  pins.


> > Signed-off-by: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>
> > ---
> >  drivers/rtc/rtc-pcf2127.c | 35 +++++++++++++++++++++++++++++++++++
> >  1 file changed, 35 insertions(+)
> > 
> > diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c
> > index 4148e135f935..68af4d0438b8 100644
> > --- a/drivers/rtc/rtc-pcf2127.c
> > +++ b/drivers/rtc/rtc-pcf2127.c
> > @@ -191,6 +191,7 @@ struct pcf21xx_config {
> >  	int max_register;
> >  	unsigned int has_nvmem:1;
> >  	unsigned int has_bit_wd_ctl_cd0:1;
> > +	unsigned int has_int_a_b:1; /* PCF2131 supports two interrupt outputs. */
> >  	u8 regs_td_base; /* Time/data base registers. */
> >  	u8 regs_alarm_base; /* Alarm function base registers. */
> >  	u8 reg_wd_ctl; /* Watchdog control register. */
> > @@ -879,6 +880,7 @@ static struct pcf21xx_config pcf21xx_cfg[] = {
> >  		.max_register = 0x1d,
> >  		.has_nvmem = 1,
> >  		.has_bit_wd_ctl_cd0 = 1,
> > +		.has_int_a_b = 0,
> >  		.regs_td_base = PCF2127_REG_TIME_DATE_BASE,
> >  		.regs_alarm_base = PCF2127_REG_ALARM_BASE,
> >  		.reg_wd_ctl = PCF2127_REG_WD_CTL,
> > @@ -902,6 +904,7 @@ static struct pcf21xx_config pcf21xx_cfg[] = {
> >  		.max_register = 0x19,
> >  		.has_nvmem = 0,
> >  		.has_bit_wd_ctl_cd0 = 0,
> > +		.has_int_a_b = 0,
> >  		.regs_td_base = PCF2127_REG_TIME_DATE_BASE,
> >  		.regs_alarm_base = PCF2127_REG_ALARM_BASE,
> >  		.reg_wd_ctl = PCF2127_REG_WD_CTL,
> > @@ -925,6 +928,7 @@ static struct pcf21xx_config pcf21xx_cfg[] = {
> >  		.max_register = 0x36,
> >  		.has_nvmem = 0,
> >  		.has_bit_wd_ctl_cd0 = 0,
> > +		.has_int_a_b = 1,
> >  		.regs_td_base = PCF2131_REG_TIME_DATE_BASE,
> >  		.regs_alarm_base = PCF2131_REG_ALARM_BASE,
> >  		.reg_wd_ctl = PCF2131_REG_WD_CTL,
> > @@ -1017,6 +1021,28 @@ static int pcf2127_enable_ts(struct device *dev, int ts_id)
> >  	return ret;
> >  }
> >  
> > +/* Route all interrupt sources to INT A pin. */
> > +static int pcf2127_configure_interrupt_pins(struct device *dev)
> > +{
> > +	struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
> > +	int ret;
> > +
> > +	/* Mask bits need to be cleared to enable corresponding
> > +	 * interrupt source.
> > +	 */
> > +	ret = regmap_write(pcf2127->regmap,
> > +			   PCF2131_REG_INT_A_MASK1, 0);
> > +	if (ret)
> > +		return ret;
> > +
> > +	ret = regmap_write(pcf2127->regmap,
> > +			   PCF2131_REG_INT_A_MASK2, 0);
> > +	if (ret)
> > +		return ret;
> > +
> > +	return ret;
> > +}
> > +
> >  static int pcf2127_probe(struct device *dev, struct regmap *regmap,
> >  			 int alarm_irq, const char *name, const struct pcf21xx_config *config)
> >  {
> > @@ -1076,6 +1102,15 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap,
> >  		set_bit(RTC_FEATURE_ALARM, pcf2127->rtc->features);
> >  	}
> >  
> > +	if (pcf2127->cfg->has_int_a_b) {
> > +		/* Configure int A/B pins, independently of alarm_irq. */
> > +		ret = pcf2127_configure_interrupt_pins(dev);
> > +		if (ret) {
> > +			dev_err(dev, "failed to configure interrupt pins\n");
> > +			return ret;
> > +		}
> > +	}
> > +
> >  	if (pcf2127->cfg->has_nvmem) {
> >  		struct nvmem_config nvmem_cfg = {
> >  			.priv = pcf2127,
> > -- 
> > 2.30.2
> > 
> 
> -- 
> Alexandre Belloni, co-owner and COO, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com
> 


-- 
Hugo Villeneuve <hugo@xxxxxxxxxxx>



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux