The serial/UART device node does not have children with unit addresses,
so adderss/size cells are not correct.
Fixes: f5837418479a ("arm64: dts: qcom: sm8450: add uart20 node")
Fixes: 5188049c9b36 ("arm64: dts: qcom: Add base SM8450 DTSI")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8450.dtsi | 4 ----
1 file changed, 4 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index d66dcd8fe61f..395a3a156e24 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -1017,8 +1017,6 @@ uart20: serial@894000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_uart20_default>;
interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
status = "disabled";
};
@@ -1411,8 +1409,6 @@ uart7: serial@99c000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
status = "disabled";
};
};
--
2.34.1
