Node names should be generic (as Devicetree spec mandates), so use
"bluetooth" for BT node.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
Changes since v1:
1. Fix also msm8996-xiaomi-common
---
arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sc7180-idp.dts | 2 +-
arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
index 5b47b8de69da..2acfed28e3cb 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
@@ -229,7 +229,7 @@ &blsp1_uart2 {
status = "okay";
label = "QCA_UART";
- bluetooth: qca6174a {
+ bluetooth: bluetooth {
compatible = "qcom,qca6174-bt";
enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index 774f9d45f051..6ea8dd7d3e01 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -430,7 +430,7 @@ &uart3 {
pinctrl-names = "default", "sleep";
pinctrl-1 = <&qup_uart3_sleep>;
- bluetooth: wcn3990-bt {
+ bluetooth: bluetooth {
compatible = "qcom,wcn3990-bt";
vddio-supply = <&vreg_l10a_1p8>;
vddxo-supply = <&vreg_l1c_1p8>;
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
index a78075155310..e19178c1ec44 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
@@ -862,7 +862,7 @@ &uart6 {
pinctrl-0 = <&qup_uart6_4pin>;
- bluetooth: wcn3990-bt {
+ bluetooth: bluetooth {
compatible = "qcom,wcn3990-bt";
vddio-supply = <&src_pp1800_s4a>;
vddxo-supply = <&pp1800_l7a_wcn3990>;
--
2.34.1
