[PATCH v2] dt-bindings: leds: Document Bluetooth and WLAN triggers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add the missing trigger patterns for Bluetooth and WLAN activity, which
are already in active use.

While at it, move the mmc pattern comment where it belongs, and restore
alphabetical sort order.

Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
---
arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2.dtb: leds: bt_active_led:linux,default-trigger: 'oneOf' conditional failed, one must be fixed:
	'hci0-power' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern']
	'hci0-power' does not match '^mmc[0-9]+$'
	From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml
arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2.dtb: leds: wlan_active_led:linux,default-trigger: 'oneOf' conditional failed, one must be fixed:
	'phy0tx' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern']
	'phy0tx' does not match '^mmc[0-9]+$'
	From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml

v2:
  - Add Reviewed-by.
---
 Documentation/devicetree/bindings/leds/common.yaml | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml
index f5c57a580078ea23..d34bb58c00371402 100644
--- a/Documentation/devicetree/bindings/leds/common.yaml
+++ b/Documentation/devicetree/bindings/leds/common.yaml
@@ -98,9 +98,13 @@ properties:
             # LED alters the brightness for the specified duration with one software
             # timer (requires "led-pattern" property)
           - pattern
-        # LED is triggered by SD/MMC activity
-      - pattern: "^mmc[0-9]+$"
       - pattern: "^cpu[0-9]*$"
+      - pattern: "^hci[0-9]+-power$"
+        # LED is triggered by Bluetooth activity
+      - pattern: "^mmc[0-9]+$"
+        # LED is triggered by SD/MMC activity
+      - pattern: "^phy[0-9]+tx$"
+        # LED is triggered by WLAN activity
 
   led-pattern:
     description: |
-- 
2.34.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux