On Thu, 19 Jan 2023 11:47:13 -0600, Eddie James wrote: > The I2C Responder translates I2C commands to CFAM or SCOM operations, > effectively implementing an FSI master. > > Signed-off-by: Eddie James <eajames@xxxxxxxxxxxxx> > --- > .../devicetree/bindings/fsi/ibm,i2cr.yaml | 42 +++++++++++++++++++ > 1 file changed, 42 insertions(+) > create mode 100644 Documentation/devicetree/bindings/fsi/ibm,i2cr.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: ./Documentation/devicetree/bindings/fsi/ibm,i2cr.yaml:23:4: [error] syntax error: expected <block end>, but found '<block mapping start>' (syntax) ./Documentation/devicetree/bindings/fsi/ibm,i2cr.yaml:24:5: [warning] wrong indentation: expected 5 but found 4 (indentation) ./Documentation/devicetree/bindings/fsi/ibm,i2cr.yaml:33:2: [warning] wrong indentation: expected 2 but found 1 (indentation) dtschema/dtc warnings/errors: make[1]: *** Deleting file 'Documentation/devicetree/bindings/fsi/ibm,i2cr.example.dts' Documentation/devicetree/bindings/fsi/ibm,i2cr.yaml:23:4: did not find expected key make[1]: *** [Documentation/devicetree/bindings/Makefile:26: Documentation/devicetree/bindings/fsi/ibm,i2cr.example.dts] Error 1 make[1]: *** Waiting for unfinished jobs.... ./Documentation/devicetree/bindings/fsi/ibm,i2cr.yaml:23:4: did not find expected key /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/fsi/ibm,i2cr.yaml: ignoring, error parsing file make: *** [Makefile:1508: dt_binding_check] Error 2 doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230119174714.1486042-2-eajames@xxxxxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
