Add second DSI host and PHY available on the APQ8064 platform.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm/boot/dts/qcom-apq8064.dtsi | 69 ++++++++++++++++++++++++++++-
1 file changed, 67 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index b7e5b45e1c04..3ae6abd85f3d 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -865,8 +865,8 @@ mmcc: clock-controller@4000000 {
<&gcc PLL8_VOTE>,
<&dsi0_phy 1>,
<&dsi0_phy 0>,
- <0>,
- <0>,
+ <&dsi1_phy 1>,
+ <&dsi1_phy 0>,
<&hdmi_phy>;
clock-names = "pxo",
"pll3",
@@ -1342,6 +1342,71 @@ dsi0_phy: phy@4700200 {
status = "disabled";
};
+ dsi1: dsi@5800000 {
+ compatible = "qcom,mdss-dsi-ctrl";
+ label = "MDSS DSI CTRL->0";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x05800000 0x200>;
+ reg-names = "dsi_ctrl";
+
+ clocks = <&mmcc DSI2_M_AHB_CLK>,
+ <&mmcc DSI2_S_AHB_CLK>,
+ <&mmcc AMP_AHB_CLK>,
+ <&mmcc DSI2_CLK>,
+ <&mmcc DSI2_BYTE_CLK>,
+ <&mmcc DSI2_PIXEL_CLK>,
+ <&mmcc DSI2_ESC_CLK>;
+ clock-names = "iface", "bus", "core_mmss",
+ "src", "byte", "pixel",
+ "core";
+
+ assigned-clocks = <&mmcc DSI2_BYTE_SRC>,
+ <&mmcc DSI2_ESC_SRC>,
+ <&mmcc DSI2_SRC>,
+ <&mmcc DSI2_PIXEL_SRC>;
+ assigned-clock-parents = <&dsi0_phy 0>,
+ <&dsi0_phy 0>,
+ <&dsi0_phy 1>,
+ <&dsi0_phy 1>;
+ syscon-sfpb = <&mmss_sfpb>;
+ phys = <&dsi1_phy>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi1_in: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi1_out: endpoint {
+ };
+ };
+ };
+ };
+
+
+ dsi1_phy: dsi-phy@5800200 {
+ compatible = "qcom,dsi-phy-28nm-8960";
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ reg = <0x05800200 0x100>,
+ <0x05800300 0x200>,
+ <0x05800500 0x5c>;
+ reg-names = "dsi_pll", "dsi_phy", "dsi_phy_regulator";
+ clock-names = "iface", "ref";
+ clocks = <&mmcc DSI2_M_AHB_CLK>,
+ <&pxo_board>;
+ status = "disabled";
+ };
mdp_port0: iommu@7500000 {
compatible = "qcom,apq8064-iommu";
--
2.39.0
