[PATCH v5 2/3] i2c: algo: bit: allow getsda to be NULL

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is in preparation of supporting write-only SDA in i2c-gpio.

Signed-off-by: Heiner Kallweit <hkallweit1@xxxxxxxxx>
---
v3:
- check for adap->getsda in readbytes()
- align warning message level for info on missing getscl/getsda
v4:
- handle SDA and SCL independently
- properly handle case that SDA is NULL but SCL not
---
 drivers/i2c/algos/i2c-algo-bit.c | 77 +++++++++++++++-----------------
 1 file changed, 35 insertions(+), 42 deletions(-)

diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c
index fc90293af..eddf25b90 100644
--- a/drivers/i2c/algos/i2c-algo-bit.c
+++ b/drivers/i2c/algos/i2c-algo-bit.c
@@ -184,8 +184,9 @@ static int i2c_outb(struct i2c_adapter *i2c_adap, unsigned char c)
 
 	/* read ack: SDA should be pulled down by slave, or it may
 	 * NAK (usually to report problems with the data we wrote).
+	 * Always report ACK if SDA is write-only.
 	 */
-	ack = !getsda(adap);    /* ack: sda is pulled low -> success */
+	ack = !adap->getsda || !getsda(adap);    /* ack: sda is pulled low -> success */
 	bit_dbg(2, &i2c_adap->dev, "i2c_outb: 0x%02x %s\n", (int)c,
 		ack ? "A" : "NA");
 
@@ -238,71 +239,55 @@ static int test_bus(struct i2c_adapter *i2c_adap)
 			return -ENODEV;
 	}
 
+	if (adap->getsda == NULL)
+		pr_info("%s: SDA is write-only, testing not possible\n", name);
 	if (adap->getscl == NULL)
-		pr_info("%s: Testing SDA only, SCL is not readable\n", name);
+		pr_info("%s: SCL is write-only, testing not possible\n", name);
 
-	sda = getsda(adap);
-	scl = (adap->getscl == NULL) ? 1 : getscl(adap);
+	sda = adap->getsda ? getsda(adap) : 1;
+	scl = adap->getscl ? getscl(adap) : 1;
 	if (!scl || !sda) {
-		printk(KERN_WARNING
-		       "%s: bus seems to be busy (scl=%d, sda=%d)\n",
-		       name, scl, sda);
+		pr_warn("%s: bus seems to be busy (scl=%d, sda=%d)\n", name, scl, sda);
 		goto bailout;
 	}
 
 	sdalo(adap);
-	sda = getsda(adap);
-	scl = (adap->getscl == NULL) ? 1 : getscl(adap);
-	if (sda) {
-		printk(KERN_WARNING "%s: SDA stuck high!\n", name);
+	if (adap->getsda && getsda(adap)) {
+		pr_warn("%s: SDA stuck high!\n", name);
 		goto bailout;
 	}
-	if (!scl) {
-		printk(KERN_WARNING
-		       "%s: SCL unexpected low while pulling SDA low!\n",
-		       name);
+	if (adap->getscl && !getscl(adap)) {
+		pr_warn("%s: SCL unexpected low while pulling SDA low!\n", name);
 		goto bailout;
 	}
 
 	sdahi(adap);
-	sda = getsda(adap);
-	scl = (adap->getscl == NULL) ? 1 : getscl(adap);
-	if (!sda) {
-		printk(KERN_WARNING "%s: SDA stuck low!\n", name);
+	if (adap->getsda && !getsda(adap)) {
+		pr_warn("%s: SDA stuck low!\n", name);
 		goto bailout;
 	}
-	if (!scl) {
-		printk(KERN_WARNING
-		       "%s: SCL unexpected low while pulling SDA high!\n",
-		       name);
+	if (adap->getscl && !getscl(adap)) {
+		pr_warn("%s: SCL unexpected low while pulling SDA high!\n", name);
 		goto bailout;
 	}
 
 	scllo(adap);
-	sda = getsda(adap);
-	scl = (adap->getscl == NULL) ? 0 : getscl(adap);
-	if (scl) {
-		printk(KERN_WARNING "%s: SCL stuck high!\n", name);
+	if (adap->getscl && getscl(adap)) {
+		pr_warn("%s: SCL stuck high!\n", name);
 		goto bailout;
 	}
-	if (!sda) {
-		printk(KERN_WARNING
-		       "%s: SDA unexpected low while pulling SCL low!\n",
-		       name);
+	if (adap->getsda && !getsda(adap)) {
+		pr_warn("%s: SDA unexpected low while pulling SCL low!\n", name);
 		goto bailout;
 	}
 
 	sclhi(adap);
-	sda = getsda(adap);
-	scl = (adap->getscl == NULL) ? 1 : getscl(adap);
-	if (!scl) {
-		printk(KERN_WARNING "%s: SCL stuck low!\n", name);
+	if (adap->getscl && !getscl(adap)) {
+		pr_warn("%s: SCL stuck low!\n", name);
 		goto bailout;
 	}
-	if (!sda) {
-		printk(KERN_WARNING
-		       "%s: SDA unexpected low while pulling SCL high!\n",
-		       name);
+	if (adap->getsda && !getsda(adap)) {
+		pr_warn("%s: SDA unexpected low while pulling SCL high!\n", name);
 		goto bailout;
 	}
 
@@ -420,6 +405,10 @@ static int readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
 	unsigned char *temp = msg->buf;
 	int count = msg->len;
 	const unsigned flags = msg->flags;
+	struct i2c_algo_bit_data *adap = i2c_adap->algo_data;
+
+	if (!adap->getsda)
+		return -EOPNOTSUPP;
 
 	while (count > 0) {
 		inval = i2c_inb(i2c_adap);
@@ -670,11 +659,15 @@ static int __i2c_bit_add_bus(struct i2c_adapter *adap,
 	if (ret < 0)
 		return ret;
 
-	/* Complain if SCL can't be read */
-	if (bit_adap->getscl == NULL) {
+	if (bit_adap->getsda == NULL)
+		dev_warn(&adap->dev, "Not I2C compliant: can't read SDA\n");
+
+	if (bit_adap->getscl == NULL)
 		dev_warn(&adap->dev, "Not I2C compliant: can't read SCL\n");
+
+	if (bit_adap->getsda == NULL || bit_adap->getscl == NULL)
 		dev_warn(&adap->dev, "Bus may be unreliable\n");
-	}
+
 	return 0;
 }
 
-- 
2.39.0





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux