Re: [PATCH v3 5/8] arm64: dts: qcom: Add msm8939 SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 18/01/2023 09:59, Stephan Gerhold wrote:
On Tue, Jan 17, 2023 at 02:48:43AM +0000, Bryan O'Donoghue wrote:
Add msm8939 a derivative SoC of msm8916. This SoC contains a number of key
differences to msm8916.

- big.LITTLE Octa Core - quad 1.5GHz + quad 1.0GHz
- DRAM 1x800 LPDDR3
- Camera 4+4 lane CSI
- Venus @ 1080p60 HEVC
- DSI x 2
- Adreno A405
- WiFi wcn3660/wcn3680b 802.11ac

Co-developed-by: Shawn Guo <shawn.guo@xxxxxxxxxx>
Signed-off-by: Shawn Guo <shawn.guo@xxxxxxxxxx>
Co-developed-by: Jun Nie <jun.nie@xxxxxxxxxx>
Signed-off-by: Jun Nie <jun.nie@xxxxxxxxxx>
Co-developed-by: Benjamin Li <benl@xxxxxxxxxxxx>
Signed-off-by: Benjamin Li <benl@xxxxxxxxxxxx>
Co-developed-by: James Willcox <jwillcox@xxxxxxxxxxxx>
Signed-off-by: James Willcox <jwillcox@xxxxxxxxxxxx>
Co-developed-by: Leo Yan <leo.yan@xxxxxxxxxx>
Signed-off-by: Leo Yan <leo.yan@xxxxxxxxxx>
Co-developed-by: Joseph Gates <jgates@xxxxxxxxxxxx>
Signed-off-by: Joseph Gates <jgates@xxxxxxxxxxxx>
Co-developed-by: Max Chen <mchen@xxxxxxxxxxxx>
Signed-off-by: Max Chen <mchen@xxxxxxxxxxxx>
Co-developed-by: Zac Crosby <zac@xxxxxxxxxxxx>
Signed-off-by: Zac Crosby <zac@xxxxxxxxxxxx>
Co-developed-by: Vincent Knecht <vincent.knecht@xxxxxxxxxx>
Signed-off-by: Vincent Knecht <vincent.knecht@xxxxxxxxxx>
Co-developed-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
---
  arch/arm64/boot/dts/qcom/msm8939.dtsi | 2393 +++++++++++++++++++++++++
  1 file changed, 2393 insertions(+)
  create mode 100644 arch/arm64/boot/dts/qcom/msm8939.dtsi

diff --git a/arch/arm64/boot/dts/qcom/msm8939.dtsi b/arch/arm64/boot/dts/qcom/msm8939.dtsi
new file mode 100644
index 0000000000000..8cd358a9fe623
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8939.dtsi
@@ -0,0 +1,2393 @@
[...]
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@100 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "spin-table";
+			reg = <0x100>;
+			next-level-cache = <&L2_1>;
+			power-domains = <&vreg_dummy>;
+			power-domain-names = "cpr";

Why are you adding a dummy power domain here? IMO this would be better
added together with CPR. Especially because I would expect two power
domains here later ("mx", "cpr"). For cpufreq you also need to make
votes for the "MSM8939_VDDMX" power domain.

I'm pretty sure there's binding checks that demand this but, I will re-verify it.


+			qcom,acc = <&acc0>;
+			qcom,saw = <&saw0>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&apcs1_mbox>;
+			#cooling-cells = <2>;
+			L2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+			};
+		};
[...]
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+
+		rng@22000 {
+			compatible = "qcom,prng";
+			reg = <0x00022000 0x200>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		qfprom: qfprom@5c000 {
+			compatible = "qcom,msm8916-qfprom", "qcom,qfprom";
+			reg = <0x0005c000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			tsens_caldata: caldata@a0 {
+				reg = <0xa0 0x5c>;
+			};
+			cpr_efuse_init_voltage1: ivoltage1@dc {
+				reg = <0xdc 0x4>;
+				bits = <4 6>;
+			};
+			cpr_efuse_init_voltage2: ivoltage2@da {
+				reg = <0xda 0x4>;
+				bits = <2 6>;
+			};
+			cpr_efuse_init_voltage3: ivoltage3@d8 {
+				reg = <0xd8 0x4>;
+				bits = <0 6>;
+			};
+			cpr_efuse_quot1: quot1@dd {
+				reg = <0xdd 0x8>;
+				bits = <2 12>;
+			};
+			cpr_efuse_quot2: quot2@db {
+				reg = <0xdb 0x8>;
+				bits = <0x0 12>;
+			};
+			cpr_efuse_ring1: ring1@de {
+				reg = <0xde 0x4>;
+				bits = <6 3>;
+			};
+			cpr_efuse_revision: revision@5 {
+				reg = <0x5 0x1>;
+				bits = <5 1>;
+			};
+			cpr_efuse_revision_high: revision-high@7 {
+				reg = <0x7 0x1>;
+				bits = <0 1>;
+			};
+			cpr_efuse_pvs_version: pvs@3 {
+				reg = <0x3 0x1>;
+				bits = <5 1>;
+			};
+			cpr_efuse_pvs_version_high: pvs-high@6 {
+				reg = <0x6 0x1>;
+				bits = <2 2>;
+			};
+			cpr_efuse_speedbin: speedbin@c {
+				reg = <0xc 0x1>;
+				bits = <2 3>;
+			};

Please add the CPR items later together with CPR. This will make the
review a bit easier because we don't need to check that these are right
for the initial submission.

I will excise this if I can, i.e. if the system will still boot once done.


+		};
[...]
+		mdss: display-subsystem@1a00000 {
+			compatible = "qcom,mdss";
+			reg = <0x01a00000 0x1000>,
+			      <0x01ac8000 0x3000>;
+			reg-names = "mdss_phys", "vbif_phys";
+
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>;
+			clock-names = "iface",
+				      "bus",
+				      "vsync";
+
+			power-domains = <&gcc MDSS_GDSC>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#interrupt-cells = <1>;
+			ranges;
+
+			mdp: display-controller@1a01000 {
+				compatible = "qcom,mdp5";
+				reg = <0x01a01000 0x89000>;
+				reg-names = "mdp_phys";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_VSYNC_CLK>,
+					 <&gcc GCC_MDP_TBU_CLK>,
+					 <&gcc GCC_MDP_RT_TBU_CLK>;
+				clock-names = "iface",
+					      "bus",
+					      "core",
+					      "vsync",
+					      "tbu",
+					      "tbu_rt";
+
+				iommus = <&apps_iommu 4>;
+
+				interconnects = <&snoc_mm MASTER_MDP_PORT0 &bimc SLAVE_EBI_CH0>,
+						<&snoc_mm MASTER_MDP_PORT1 &bimc SLAVE_EBI_CH0>,
+						<&pcnoc MASTER_SPDM &snoc SLAVE_IMEM>;
+				interconnect-names = "mdp0-mem", "mdp1-mem", "register-mem";

As I mentioned a already in a direct email at some point, AFAIU adding
interconnects should be an [almost-] all or nothing step. If you only
add interconnects for MDP then everything else that needs bandwidth will
either break or only continue working as a mere side effect of MDP
voting for permanent high bandwidth.

We did discuss that. You'll also recall we concluded we would have to revert this patch to make that happen.

commit 76a748e2c1aa976d0c7fef872fa6ff93ce334a8a
Author: Leo Yan <leo.yan@xxxxxxxxxx>
Date:   Sat Apr 16 09:26:34 2022 +0800

    interconnect: qcom: msm8939: Use icc_sync_state

but then why not revert for all of these SoCs too ?

drivers/interconnect/qcom/msm8939.c:		.sync_state = icc_sync_state,
drivers/interconnect/qcom/msm8974.c:		.sync_state = icc_sync_state,
drivers/interconnect/qcom/msm8996.c:		.sync_state = icc_sync_state,
drivers/interconnect/qcom/osm-l3.c:		.sync_state = icc_sync_state,
drivers/interconnect/qcom/sc7180.c:		.sync_state = icc_sync_state,
drivers/interconnect/qcom/sc7280.c:		.sync_state = icc_sync_state,
drivers/interconnect/qcom/sc8180x.c:		.sync_state = icc_sync_state,
drivers/interconnect/qcom/sc8280xp.c:		.sync_state = icc_sync_state,
drivers/interconnect/qcom/sdm845.c:		.sync_state = icc_sync_state,
drivers/interconnect/qcom/sdx55.c:		.sync_state = icc_sync_state,
drivers/interconnect/qcom/sdx65.c:		.sync_state = icc_sync_state,
drivers/interconnect/qcom/sm6350.c:		.sync_state = icc_sync_state,

until such time as we have an all or nothing interconnect setup for each of those SoCs ?

Yes I take your point "some peripherals will appear to work only as a result of the AHB vote the MDP casts here" but, that is a bug in the definition of that hypothetical peripheral.

The MDP/display won't run without the interconnect here and the only way to pull it is to remove sync_state which begs the question why not pull sync_state for all SoCs without a perfect interconnect description ?

I think that would be a retrograde step.

(Semi-related side note: "register-mem" is neither documented nor used
  anywhere in the code?)

Oh do you have me there though, this is a holdover from the Android dtsi. I'll see if it makes a difference dropping this.


+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdp5_intf1_out: endpoint {
+							remote-endpoint = <&dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdp5_intf2_out: endpoint {
+							remote-endpoint = <&dsi1_in>;
+						};
+					};
+				};
+			};
+
+			dsi0: dsi@1a98000 {
+				compatible = "qcom,msm8916-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0x01a98000 0x25c>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				power-domains = <&gcc MDSS_GDSC>;

Why is MDSS_GDSC defined again here? The parent-child relationship of
MDSS->MDP should ensure that the MDSS_GDSC from the parent mdss node
is on when dsi is.

+
+				clocks = <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_BYTE0_CLK>,
+					 <&gcc GCC_MDSS_PCLK0_CLK>,
+					 <&gcc GCC_MDSS_ESC0_CLK>;
+				clock-names = "mdp_core",
+					      "iface",
+					      "bus",
+					      "byte",
+					      "pixel",
+					      "core";
+				assigned-clocks = <&gcc BYTE0_CLK_SRC>,
+						  <&gcc PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&dsi_phy0 0>,
+							 <&dsi_phy0 1>;
+
+				phys = <&dsi_phy0>;
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dsi0_in: endpoint {
+							remote-endpoint = <&mdp5_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			dsi_phy0: phy@1a98300 {
+				compatible = "qcom,dsi-phy-28nm-lp";
+				reg = <0x01a98300 0xd4>,
+				      <0x01a98500 0x280>,
+				      <0x01a98780 0x30>;
+				reg-names = "dsi_pll",
+					    "dsi_phy",
+					    "dsi_phy_regulator";
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface", "ref";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			dsi1: dsi@1aa0000 {
+				compatible = "qcom,msm8916-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0x01aa0000 0x25c>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <5>;
+
+				power-domains = <&gcc MDSS_GDSC>;
+
+				clocks = <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_BYTE1_CLK>,
+					 <&gcc GCC_MDSS_PCLK1_CLK>,
+					 <&gcc GCC_MDSS_ESC1_CLK>;
+				clock-names = "mdp_core",
+					      "iface",
+					      "bus",
+					      "byte",
+					      "pixel",
+					      "core";
+				assigned-clocks = <&gcc BYTE1_CLK_SRC>,
+						  <&gcc PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&dsi_phy1 0>,
+							 <&dsi_phy1 1>;

Does this work? Confusingly, BYTE1/PCLK1_CLK_SRC can only have dsi0pll
as parent in gcc-msm8939 and not the dsi1pll. <&dsi_phy1 0/1> is not a
valid parent for those clocks.

No you're right, its all wrong. I will correct it

        mdss_dsi0: qcom,mdss_dsi@1a98000 {
                compatible = "qcom,mdss-dsi-ctrl";
                label = "MDSS DSI CTRL->0";
                cell-index = <0>;
                reg = <0x1a98000 0x25c>,
                      <0x1a98500 0x2b0>,
                      <0x193e000 0x30>;
                reg-names = "dsi_ctrl", "dsi_phy", "mmss_misc_phys";
                qcom,mdss-fb-map = <&mdss_fb0>;
                qcom,mdss-mdp = <&mdss_mdp>;
                gdsc-supply = <&gdsc_mdss>;
                vdda-supply = <&pm8916_l2>;
                vdd-supply = <&pm8916_l17>;
                vddio-supply = <&pm8916_l6>;
                clocks = <&clock_gcc clk_gcc_mdss_mdp_clk>,
                         <&clock_gcc clk_gcc_mdss_ahb_clk>,
                         <&clock_gcc clk_gcc_mdss_axi_clk>,
                         <&clock_gcc_mdss clk_gcc_mdss_byte0_clk>,
                         <&clock_gcc_mdss clk_gcc_mdss_pclk0_clk>,
                         <&clock_gcc clk_gcc_mdss_esc0_clk>;
---
bod



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux