Re: [RFC v4 1/5] dt-bindings: usb: Add bindings to support multiport properties

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 1/17/2023 4:32 PM, Krzysztof Kozlowski wrote:
On 17/01/2023 10:01, Krishna Kurapati PSSNV wrote:


On 1/16/2023 10:04 PM, Rob Herring wrote:
On Sun, Jan 15, 2023 at 05:11:42PM +0530, Krishna Kurapati wrote:
Add bindings to indicate properties required to support multiport
on Snps Dwc3 controller.

Signed-off-by: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
---
   .../devicetree/bindings/usb/snps,dwc3.yaml    | 53 ++++++++++++++++---
   1 file changed, 47 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
index 6d78048c4613..3ea051beb2f8 100644
--- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
@@ -81,15 +81,26 @@ properties:
phys:
       minItems: 1
-    maxItems: 2
+    maxItems: 8
phy-names:
       minItems: 1
-    maxItems: 2
-    items:
-      enum:
-        - usb2-phy
-        - usb3-phy
+    maxItems: 8
+    oneOf:
+    - items:
+        enum:
+          - usb2-phy
+          - usb3-phy
+    - items:
+        enum:
+          - usb2-phy_port0
+          - usb2-phy_port1
+          - usb2-phy_port2
+          - usb2-phy_port3
+          - usb3-phy_port0
+          - usb3-phy_port1
+          - usb3-phy_port2
+          - usb3-phy_port3

usbN-portM

resets:
       minItems: 1
@@ -360,6 +371,22 @@ properties:
       description:
         Enable USB remote wakeup.
+ num-ports:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      This property indicates the number of ports present on the target that
+      are to be serviced by the DWC3 controller.
+    minimum: 1
+    maximum: 4
+
+  num-ss-ports:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      This property indicates the number of SS capable ports present on the
+      target that are to be serviced by the DWC3 controller.
+    minimum: 1
+    maximum: 4

This information is redundant. 'phy-names' tells you how many ports of
each.

Hi Rob,

   Thanks for the review. The reason I wanted to introduce two more
variables is to get info on number of ports  and ss-capable ports
present on hardware whether or not the user provides them in DTSI file.

In the code there are two types of per port / per phy operations:
a) Modifying GUSB2PFYCFG and GUSB3PIPECTL registers per phy.
b) Generic Phy operations - per phy.

In today's code, if someone doesn't mention the SSPHY in DTSI,
dwc->usb3_generic_phy will be NULL and any call to phy operations will
just bail out. And irrespective of whether we provide SS Phy in DTSI or
not, we still configure GUSB3PIPECTL register.

Consider the following cases:

1. There are 3 ports and 2 of them are SS capable and all phy's are
mentioned in DTSI.

phy-names= "usb2-port0", "usb3-port0", "usb2-port1", "usb3-port1",
"usb2-port2"

When we count them in the driver, we get num ports as 3 (presuming
num-ports = num of hs ports) and num-ss-ports = 2.

Since there is no ambiguity in which all ports to configure, we can
modify GUSB2PHYCFG registers for all 3 HS Phy's and GUSB3PIPECTL for
both SS Phy's.
This is a proper scenario.

2. If the user skips providing SS Phy on Port-0, then:

phy-names= "usb2-port0", "usb2-port1", "usb3-port1", "usb2-port2"

If we count the phys, we end up getting num-ports=3 and num-ss-ports=1.

Since in the driver code, we are not keeping track of which ports are SS
capable and which ones are not, we end up configuring
GUSB2PIPECTL(port-0) instead of port-1  as the num-ss-ports is "1" which
is incorrect.

3. If the user skips providing one complete port, in this case port-1 is
skipped, then:

phy-names= "usb2-port0", "usb3-port0", "usb2-port2"

If we count the phys, we end up getting num-ports=2 and num-ss-ports=1.

Since in the driver code, we are not keeping track of which ports are SS
capable and which ones are not, we end up configuring
GUSB2PHYCFG(port-0) and GUSB2PHYCFG(port-1) instead of port-2 which is
incorrect.

Why? You know you have port-2 from the phy name, so why would you ignore
this information?

Hi Krzysztof,

Thanks for the review,

The concern I had with that approach is that, we need to keep track of per port supported speeds in some array /flags and check them whenever we are modifying the dwc3-phy registers. This makes the code a little unreadable.

To avoid these scenarios, if we can get the exact number of SS Ports and
Ports in total present on the HW, we can configure all the registers
whether the phy's are provided in DTSI or not. (This is of no harm I
believe as it still works in today's code)

Doesn't the driver know how many phys it has in such case through
respective compatible?

The core driver has only one compatible currently "snps,dwc3".

Are you suggesting to add new compatible to driver core in case any multiport device is being used and get this info from there ?


Incase the 2nd and 3rd scenarios are not allowed and user *MUST* declare
all the phy's in the DTSI, then I can go ahead and remove these
properties and count them in the driver code.


Why you cannot then configure all phys in the driver all ports as some
safe default and then customize it depending on the actual port used?

To do this, we still need to get info on number of hs/ss phy's present on hardware and currently there is no register I believe in DWC3 core global address space that can give this info. I see that HCSPARAMS1 Reg gives some info but that is not accessible from driver core.

According to databook:

"Number of Ports (MaxPorts)
-> Number of ports implemented is defined by the parameter
(`DWC_USB3_HOST_NUM_U2_ROOT_PORTS +
`DWC_USB3_HOST_NUM_U3_ROOT_PORTS)
-> Number of ports enabled is controlled by the core input signals
host_num_u2_port[3:0]+host_num_u3_port[3:0]"
Regards,
Krishna,




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux