Rob Herring <robh@xxxxxxxxxx> 于2023年1月13日周五 23:26写道： > > > On Fri, 13 Jan 2023 19:07:37 +0800, Keguang Zhang wrote: > > Add devicetree binding document for the Loongson-1 clock driver. > > > > Signed-off-by: Keguang Zhang <keguang.zhang@xxxxxxxxx> > > --- > > .../bindings/clock/loongson,ls1x-clk.yaml | 81 +++++++++++++++++++ > > 1 file changed, 81 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/clock/loongson,ls1x-clk.yaml > > > > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' > on your patch (DT_CHECKER_FLAGS is new in v5.13): > > yamllint warnings/errors: > > dtschema/dtc warnings/errors: > Documentation/devicetree/bindings/clock/loongson,ls1x-clk.example.dts:36.39-41.15: Warning (unique_unit_address_if_enabled): /example-0/clocks/cpu_clk@1fe78034: duplicate unit-address (also used in node /example-0/clocks/ahb_clk@1fe78034) I did notice this warning. But my situation is the cpu_clk and ahb_clk share the same registers. May I have your suggestion? Thanks! > > doc reference errors (make refcheckdocs): > > See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230113110738.1505973-2-keguang.zhang@xxxxxxxxx > > The base for the series is generally the latest rc1. A different dependency > should be noted in *this* patch. > > If you already ran 'make dt_binding_check' and didn't see the above > error(s), then make sure 'yamllint' is installed and dt-schema is up to > date: > > pip3 install dtschema --upgrade > > Please check and re-submit after running the above command yourself. Note > that DT_SCHEMA_FILES can be set to your schema file to speed up checking > your schema. However, it must be unset to test all examples with your schema. > -- Best regards, Kelvin Cheung
