Re: [PATCH v3 6/6] ARM: dts: stm32: Use new media bus type macros

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Laurent

On 1/14/23 16:36, Laurent Pinchart wrote:
Hugues, Maxime, Alexandre, could one of you take this patch in your tree
for v6.3 ? The two patches that it depends on have both been merged in
v6.2.

Yes sure.

Cheers
Alex


On Thu, Jun 16, 2022 at 01:14:10AM +0300, Laurent Pinchart wrote:
Now that a header exists with macros for the media interface bus-type
values, replace hardcoding numerical constants with the corresponding
macros in the DT sources.

Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
---
  arch/arm/boot/dts/stm32429i-eval.dts  | 3 ++-
  arch/arm/boot/dts/stm32mp157c-ev1.dts | 3 ++-
  2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
index 0d98aca01736..5fae11e6607b 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -50,6 +50,7 @@
  #include "stm32f429-pinctrl.dtsi"
  #include <dt-bindings/input/input.h>
  #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/video-interfaces.h>
/ {
  	model = "STMicroelectronics STM32429i-EVAL board";
@@ -186,7 +187,7 @@ &dcmi {
  	port {
  		dcmi_0: endpoint {
  			remote-endpoint = <&ov2640_0>;
-			bus-type = <5>;
+			bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
  			bus-width = <8>;
  			hsync-active = <0>;
  			vsync-active = <0>;
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index d142dd30e16b..306d41a6138f 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -8,6 +8,7 @@
  #include "stm32mp157c-ed1.dts"
  #include <dt-bindings/gpio/gpio.h>
  #include <dt-bindings/input/input.h>
+#include <dt-bindings/media/video-interfaces.h>
/ {
  	model = "STMicroelectronics STM32MP157C eval daughter on eval mother";
@@ -90,7 +91,7 @@ &dcmi {
  	port {
  		dcmi_0: endpoint {
  			remote-endpoint = <&ov5640_0>;
-			bus-type = <5>;
+			bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
  			bus-width = <8>;
  			hsync-active = <0>;
  			vsync-active = <0>;





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux