1. Add S4 SoC PLL and Peripheral clock controller dt-bindings.
2. Add PLL and Peripheral clock controller driver for S4 SOC.
Yu Tu (3):
dt-bindings: clock: document Amlogic S4 SoC PLL & peripheral clock
controller
clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver
clk: meson: s4: add support for Amlogic S4 SoC peripheral clock
controller
V5 -> V6: Change send patch series, as well change format and clock flags.
V4 -> V5: change format and clock flags and adjust the patch series as suggested
by Jerome.
V3 -> V4: change format and clock flags.
V2 -> V3: Use two clock controller.
V1 -> V2: Change format as discussed in the email.
Link:https://lore.kernel.org/all/20221123021346.18136-1-yu.tu@xxxxxxxxxxx/
.../clock/amlogic,s4-peripherals-clkc.yaml | 104 +
.../bindings/clock/amlogic,s4-pll-clkc.yaml | 50 +
MAINTAINERS | 1 +
drivers/clk/meson/Kconfig | 25 +
drivers/clk/meson/Makefile | 2 +
drivers/clk/meson/s4-peripherals.c | 3874 +++++++++++++++++
drivers/clk/meson/s4-peripherals.h | 218 +
drivers/clk/meson/s4-pll.c | 875 ++++
drivers/clk/meson/s4-pll.h | 88 +
.../clock/amlogic,s4-peripherals-clkc.h | 131 +
.../dt-bindings/clock/amlogic,s4-pll-clkc.h | 30 +
11 files changed, 5398 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-peripherals-clkc.yaml
create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml
create mode 100644 drivers/clk/meson/s4-peripherals.c
create mode 100644 drivers/clk/meson/s4-peripherals.h
create mode 100644 drivers/clk/meson/s4-pll.c
create mode 100644 drivers/clk/meson/s4-pll.h
create mode 100644 include/dt-bindings/clock/amlogic,s4-peripherals-clkc.h
create mode 100644 include/dt-bindings/clock/amlogic,s4-pll-clkc.h
base-commit: 1b929c02afd37871d5afb9d498426f83432e71c2
--
2.33.1
