Fix dtbs_check warning now that we have a correct kpss-gcc yaml
schema. Add additional qcom,kpss-gcc compatible to differentiate
devices where kpss-gcc should provide a clk and where kpss-gcc should
just provide the registers and the syscon phandle.
Add missing #clock-cells and remove useless clock-output-names for
ipq806x.
Add missing bindings for msm8960 and apq8064 kpss-gcc node.
Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
---
arch/arm/boot/dts/qcom-apq8064.dtsi | 5 ++++-
arch/arm/boot/dts/qcom-ipq8064.dtsi | 4 ++--
arch/arm/boot/dts/qcom-mdm9615.dtsi | 2 +-
arch/arm/boot/dts/qcom-msm8660.dtsi | 2 +-
arch/arm/boot/dts/qcom-msm8960.dtsi | 5 ++++-
5 files changed, 12 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 1f3e0aa9ab0c..1e68b42acb91 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -880,8 +880,11 @@ mmcc: clock-controller@4000000 {
};
l2cc: clock-controller@2011000 {
- compatible = "qcom,kpss-gcc", "syscon";
+ compatible = "qcom,kpss-gcc-apq8064", "qcom,kpss-gcc", "syscon";
reg = <0x2011000 0x1000>;
+ clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+ clock-names = "pll8_vote", "pxo";
+ #clock-cells = <0>;
};
rpm: rpm@108000 {
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 7e784b0995da..de87fcaaa836 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -570,11 +570,11 @@ IRQ_TYPE_EDGE_RISING)>,
};
l2cc: clock-controller@2011000 {
- compatible = "qcom,kpss-gcc", "syscon";
+ compatible = "qcom,kpss-gcc-ipq8064", "qcom,kpss-gcc", "syscon";
reg = <0x02011000 0x1000>;
clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
clock-names = "pll8_vote", "pxo";
- clock-output-names = "acpu_l2_aux";
+ #clock-cells = <0>;
};
acc0: clock-controller@2088000 {
diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi
index b0fe1d95d88f..61dfec3b9037 100644
--- a/arch/arm/boot/dts/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi
@@ -116,7 +116,7 @@ lcc: clock-controller@28000000 {
};
l2cc: clock-controller@2011000 {
- compatible = "qcom,kpss-gcc", "syscon";
+ compatible = "qcom,kpss-gcc-mdm9615", "qcom,kpss-gcc", "syscon";
reg = <0x02011000 0x1000>;
};
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
index 86f76d0feff4..f601b40ebcf4 100644
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -473,7 +473,7 @@ pm8058_led133: led@133 {
};
l2cc: clock-controller@2082000 {
- compatible = "qcom,kpss-gcc", "syscon";
+ compatible = "qcom,kpss-gcc-msm8660", "qcom,kpss-gcc", "syscon";
reg = <0x02082000 0x1000>;
};
diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
index 7debf9db7cb1..3bd07cac315b 100644
--- a/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -183,8 +183,11 @@ clock-controller@4000000 {
};
l2cc: clock-controller@2011000 {
- compatible = "qcom,kpss-gcc", "syscon";
+ compatible = "qcom,kpss-gcc-msm8960", "qcom,kpss-gcc", "syscon";
reg = <0x2011000 0x1000>;
+ clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+ clock-names = "pll8_vote", "pxo";
+ #clock-cells = <0>;
};
rpm: rpm@108000 {
--
2.37.2
