On Fri, 06 Jan 2023 14:26:40 +0200, Laurent Pinchart wrote: > On Thu, Jan 05, 2023 at 02:47:25PM +0100, Michael Tretter wrote: > > Various multiplexers in the pipeline are not used with the currently > > configured data path. Disable all unused multiplexers by selecting the > > "no output" (3) option. > > > > The datasheet doesn't explicitly require this, but the PXP has been seen > > to hang after processing a few hundreds of frames otherwise. > > On which platform(s) have you noticed that ? I didn't observe this myself, but took this information from the comment in your earlier patch [0] that disables the unused multiplexers. https://lore.kernel.org/linux-media/20200510223100.11641-2-laurent.pinchart@xxxxxxxxxxxxxxxx/ > > > As at it, add documentation for the multiplexers that are actually > > relevant for the data path. > > > > Signed-off-by: Michael Tretter <m.tretter@xxxxxxxxxxxxxx> > > --- > > drivers/media/platform/nxp/imx-pxp.c | 30 +++++++++++++++++----------- > > 1 file changed, 18 insertions(+), 12 deletions(-) > > > > diff --git a/drivers/media/platform/nxp/imx-pxp.c b/drivers/media/platform/nxp/imx-pxp.c > > index a957fee88829..6ffd07cda965 100644 > > --- a/drivers/media/platform/nxp/imx-pxp.c > > +++ b/drivers/media/platform/nxp/imx-pxp.c > > @@ -731,22 +731,28 @@ static u32 pxp_data_path_ctrl0(struct pxp_ctx *ctx) > > u32 ctrl0; > > > > ctrl0 = 0; > > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX15_SEL(0); > > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX15_SEL(3); > > + /* Bypass Dithering x3CH */ > > ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX14_SEL(1); > > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX13_SEL(0); > > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX13_SEL(3); > > + /* Select Rotation */ > > ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX12_SEL(0); > > + /* Select LUT */ > > ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX11_SEL(0); > > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX10_SEL(0); > > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX10_SEL(3); > > + /* Select MUX8 for LUT */ > > ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX9_SEL(1); > > + /* Select CSC 2 */ > > ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX8_SEL(0); > > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX7_SEL(0); > > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX6_SEL(0); > > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX5_SEL(0); > > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX4_SEL(0); > > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX7_SEL(3); > > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX6_SEL(3); > > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX5_SEL(3); > > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX4_SEL(3); > > + /* Bypass Rotation 2 */ > > ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX3_SEL(0); > > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX2_SEL(0); > > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX1_SEL(0); > > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX0_SEL(0); > > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX2_SEL(3); > > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX1_SEL(3); > > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX0_SEL(3); > > The muxes being disabled look fine to me, but the values of MUX8, MUX12 > and MUX14 look strange based on the i.MX7D reference manual. Maybe the > register values were different in previous SoCs ? I haven't found any > other relevant reference manual that document the mux values, I may have > overlooked something. The MUX8, MUX12 and MUX14 are documented in the i.MX6ULL reference manual section 41.11.51 and their location and function in the data path is shown in Figure 41-1. "PXP Architecture" on page 2490. Michael > > Anyway, this isn't an issue with this patch, so > > Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > > > > > return ctrl0; > > } > > @@ -760,8 +766,8 @@ static void pxp_set_data_path(struct pxp_ctx *ctx) > > ctrl0 = pxp_data_path_ctrl0(ctx); > > > > ctrl1 = 0; > > - ctrl1 |= BF_PXP_DATA_PATH_CTRL1_MUX17_SEL(1); > > - ctrl1 |= BF_PXP_DATA_PATH_CTRL1_MUX16_SEL(1); > > + ctrl1 |= BF_PXP_DATA_PATH_CTRL1_MUX17_SEL(3); > > + ctrl1 |= BF_PXP_DATA_PATH_CTRL1_MUX16_SEL(3); > > > > writel(ctrl0, dev->mmio + HW_PXP_DATA_PATH_CTRL0); > > writel(ctrl1, dev->mmio + HW_PXP_DATA_PATH_CTRL1);
