Hi Michael, Thank you for the patch. On Thu, Jan 05, 2023 at 02:47:25PM +0100, Michael Tretter wrote: > Various multiplexers in the pipeline are not used with the currently > configured data path. Disable all unused multiplexers by selecting the > "no output" (3) option. > > The datasheet doesn't explicitly require this, but the PXP has been seen > to hang after processing a few hundreds of frames otherwise. On which platform(s) have you noticed that ? > As at it, add documentation for the multiplexers that are actually > relevant for the data path. > > Signed-off-by: Michael Tretter <m.tretter@xxxxxxxxxxxxxx> > --- > drivers/media/platform/nxp/imx-pxp.c | 30 +++++++++++++++++----------- > 1 file changed, 18 insertions(+), 12 deletions(-) > > diff --git a/drivers/media/platform/nxp/imx-pxp.c b/drivers/media/platform/nxp/imx-pxp.c > index a957fee88829..6ffd07cda965 100644 > --- a/drivers/media/platform/nxp/imx-pxp.c > +++ b/drivers/media/platform/nxp/imx-pxp.c > @@ -731,22 +731,28 @@ static u32 pxp_data_path_ctrl0(struct pxp_ctx *ctx) > u32 ctrl0; > > ctrl0 = 0; > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX15_SEL(0); > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX15_SEL(3); > + /* Bypass Dithering x3CH */ > ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX14_SEL(1); > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX13_SEL(0); > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX13_SEL(3); > + /* Select Rotation */ > ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX12_SEL(0); > + /* Select LUT */ > ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX11_SEL(0); > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX10_SEL(0); > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX10_SEL(3); > + /* Select MUX8 for LUT */ > ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX9_SEL(1); > + /* Select CSC 2 */ > ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX8_SEL(0); > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX7_SEL(0); > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX6_SEL(0); > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX5_SEL(0); > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX4_SEL(0); > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX7_SEL(3); > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX6_SEL(3); > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX5_SEL(3); > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX4_SEL(3); > + /* Bypass Rotation 2 */ > ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX3_SEL(0); > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX2_SEL(0); > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX1_SEL(0); > - ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX0_SEL(0); > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX2_SEL(3); > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX1_SEL(3); > + ctrl0 |= BF_PXP_DATA_PATH_CTRL0_MUX0_SEL(3); The muxes being disabled look fine to me, but the values of MUX8, MUX12 and MUX14 look strange based on the i.MX7D reference manual. Maybe the register values were different in previous SoCs ? I haven't found any other relevant reference manual that document the mux values, I may have overlooked something. Anyway, this isn't an issue with this patch, so Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > > return ctrl0; > } > @@ -760,8 +766,8 @@ static void pxp_set_data_path(struct pxp_ctx *ctx) > ctrl0 = pxp_data_path_ctrl0(ctx); > > ctrl1 = 0; > - ctrl1 |= BF_PXP_DATA_PATH_CTRL1_MUX17_SEL(1); > - ctrl1 |= BF_PXP_DATA_PATH_CTRL1_MUX16_SEL(1); > + ctrl1 |= BF_PXP_DATA_PATH_CTRL1_MUX17_SEL(3); > + ctrl1 |= BF_PXP_DATA_PATH_CTRL1_MUX16_SEL(3); > > writel(ctrl0, dev->mmio + HW_PXP_DATA_PATH_CTRL0); > writel(ctrl1, dev->mmio + HW_PXP_DATA_PATH_CTRL1); -- Regards, Laurent Pinchart
